Loading ...
Loading ...
Loading ...
Access through Ethernet
1. After installation, connection, and power up, scroll down to locate IP Address.
2. Enter that IP address into an internet browser like Internet Explorer or Firefox.
3. A Prodigy logo screen will appear. After a few seconds it will update
and show a screen similar to the one here. Login as an observer or
administrator using the password.
4. As an Observer, several actions are available at this screen:
Controller Snapshot
lists the current status of many aspects of the
controller.
AFB Configuration File
lists the current status of many aspects of the
information display and the controller.
Key Pad Lock Status
lists if the key pad of the controller is locked or not.
Time to clean setting.
Lists the number of months of power up time the
unit must accumulate before the De-Scale / Sanitize light is switched on.
Flush Level Setting
lists the Purge level the controller is set to use.
Bin Level Scheduling
. Only applies to units that have the ice level
control installed. Lists the times and levels that have been set.
Logging in as an Administrator allows additional actions:
Key Pad Lock or Unlock
. Lists if the controller is locked or not and can be changed by selection and
submitting.
Adjust the Clean Notice
. Lists the number of months of power up time the unit must accumulate before
the De-Scale / Sanitize light is switched on. Selecting a different interval and submitting will change that
number.
Adjust the Purge or Flush level
. Lists and allows change of the
amount of water purged per cycle.
Start or stop the machine
. Allows the machine to be started or
stopped remotely.
CB0522 through CB1030
Information Display
August 2011
Page 41
•
Controller Snapshot
•
AFB Config File
•
Key Pad Lock Status
•
Time To Clean Setting
•
Flush Level Setting
•
Bin Level Scheduling
•
Change Password
Loading ...
Loading ...