Loading ...
Loading ...
Loading ...
Make sure that the room is well-aired during and after shampooing to allow better and quicker
drying.
Allow the carpet to dry well before walking on it again: freshened-up areas normally require
30minutestodry,whereasdeep-cleanedsectionsrequireapproximately2hourstodry.Of
course, the drying times also depend upon the amount of shampoo applied, temperature, air
humidity and ventilation.
Thetransparentnozzles(thedouble-injectionnozzleandtheupholsterynozzle)let
youdetermineifthecarpetorhardoorisclean.Simplylookatthecolouroftheextracted
solution.
The 3-purpose click-on hard oor adapter for the double-injection nozzle consists of three
familiar cleaning tools: (Fig. 40)
1 abrushtoreleasestickydirtfromtheoor;
2 aspongetorelease,distributeandrubintheshampoo;
3 asqueegeetocollecttheshampoofromtheoorsothatitcanbevacuumed.
1 Snap the hard oor adapter onto the double-injection shampoo nozzle. (Fig. 41)
2 Start as far away from the door as possible and then work your way towards the door.
3 Apply shampoo by squeezing the trigger on the handgrip of the tube. For scrub effectively,
just make back-and-forth strokes as you do with a regular vacuum cleaner. Normally it is
sufcient to only apply shampoo while you move the nozzle forwards. (Fig. 42)
Note:Do not make very long strokes.
4 To dry the oor, just move the nozzle backwards slowly. Make sure that only the squeegee
touches the oor and do not apply shampoo. (Fig. 43)
5 To remove shampoo effectively, make overlapping strokes and nish off with one stroke
across as shown in the gure. (Fig. 44)
6 After shampooing, release the trigger and switch off the pump. Keep the appliance itself
switched on. (Fig. 38)
7 Lift the nozzle off the oor. Then simply let the appliance suck in dry air for some time to dry
the inside of the suction hose and tube. (Fig. 39)
8 Switch off the appliance.
Shampooing furniture
The upholstery nozzle allows you to shampoo furniture, tapestries, curtains etc.
1 Attach the upholstery nozzle directly to the handgrip. (Fig. 45)
2 Shampoo the fabric in the same way as described for oors. (Fig. 46)
Cleaning and maintenance
Always switch off the appliance and remove the mains plug from the wall socket before you clean
the appliance.
You can clean all parts of the appliance, including the container, with a damp cloth.
Make sure no water enters the motor unit!
1 Empty, clean and dry the container.
2 Let the appliance suck in dry air for a few minutes to dry the inside of the tube and hose.
-
-
-
,
ENGLISH 13
Loading ...
Loading ...
Loading ...