Loading ...
Loading ...
Loading ...
33
Operation Guide
continued
Gear position indicator
The gear position is shown in the gear
position indicator.
u“-” flashes when the ignition switch is
turned on with the engine stop switch
(Off) position.
u“-” appears when the transmission is not
shifted properly.
The gear position is shown in the gear
position indicator when the D, S mode or MT
MODE are selected.
u“-” appears for a few seconds and then goes
off when the engine starts.
u“-” flashes when the engine stop switch
position is changed from (Run) to
(Off) position with the ignition switch on.
NC700X
NC750XA
NC700XD
NC750XD
u “-” flashes when the ignition switch is
turned on with the engine stop switch
(Off) position.
The indicator may flash if:
u The front wheel leaves the ground.
u You turn the wheel while the motorcycle is
upright on the stand.
This is normal. To operate the system again,
turn the ignition switch off, then on again.
If the “-” indicator is blinking in the gear
position window while riding:
(P127)
Loading ...
Loading ...
Loading ...