Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
9
EN
CART & GRILL ASSEMBLY
(continued)
3. Open the right door and install the electrical box supplied with your grill on the 2 studs at the rear,
inside wall of the cart. Pass the electrical cord through the square hole. Reinstall both nuts and
tighten with 3/8” wrench or socket wrench.
4. Lay the cord from the electrical box into the strain relief as shown below, leaving 8-9 inches (20-23cm)
of cord between the strain relief and the rear panel. Snap the strain relief together with a pair of large
pliers.
5. Push the strain relief into the rear panel of the cart until it snaps in.
Loading ...
Loading ...
Loading ...