Loading ...
Loading ...
Loading ...
9
Recipe Example: Mashed Potatoes
2.2 lbs / 1 kg cooked potatoes
7 fl. oz. / 200 ml warm milk
• Place the potatoes in a bowl and mash
for 20 - 30 seconds (3/4 way on the
Smart Speed switch)
• Add the milk. Resume mashing for
another 20 - 30 seconds.
Chopper Attachment (C)
The «ca» chopper (9) is perfectly suited
for chopping meat, hard cheese, onions,
herbs, garlic, vegetables, bread, crackers
and nuts.
Refer to the Processing Guide C for maxi-
mum quantities, recommended times and
speeds.
Before Use
• Pre-cut foods into small pieces for
easier chopping.
• Remove any bones, tendons and gristle
from meat to help prevent damage to
the blades.
• Make sure the anti-slip rubber ring (9d)
is attached to the bottom of the chopper
bowl.
Assembly and Operation
• Carefully remove the plastic cover from
the blade.
• The blade (9b) is very sharp! Always
hold it by the upper plastic part and
handle it carefully.
• Place the blade on the center pin of the
chopper bowl (9c). Press it down and
give it a turn so that it locks into place.
• Fill the chopper with food and put on
the lid (9a).
• Align the chopper with the motor body
(3) and click together.
• To operate the chopper, switch on the
appliance. During processing, hold the
motor body with one hand and the
chopper bowl with the other.
• Always chop harder foods (e.g. parme-
san cheese) at full speed.
• When chopping is complete, unplug
and press the EasyClick release buttons
to detach the motor body.
• Lift the lid up. Carefully take out the
blade before pouring out the contents
of the bowl. To remove the blade,
slightly turn it then pull it off.
Caution
• Do not use the chopper attachment to
process extremely hard foods, such as
unshelled nuts, ice cubes, coffee
beans, grains, or hard spices e.g.
nutmeg. Processing these foods could
damage the blades.
• Never place the chopper bowl in the
microwave oven.
Optional Accessories (D)
Accessories can be purchased separately.
Refer to the Optional Accessories Guide D.
Care and Cleaning (E)
• Always clean the hand blender thor-
oughly after use.
• Unplug hand blender before cleaning.
• Do not immerse the motor body (3) or
the gearbox (6a, 8a) in water or any
other liquid. Clean with a damp cloth
only.
• The lid (9a) can be rinsed under run-
ning water. Do not immerse in water,
nor place in a dishwasher.
• All other parts can be cleaned in a dish-
washer. Do not use abrasive cleaners
that could scratch the surface.
• You may remove the anti-slip rubber
rings from the bottom of the bowls for
an extra thorough clean.
• When processing foods with high pig-
ment content (e.g. carrots), the acces-
sories may become discolored. Wipe
these parts with vegetable oil before
cleaning them.
5722112244_MQ505-537_USCA_S6-24.indd 95722112244_MQ505-537_USCA_S6-24.indd 9 21.04.16 10:3621.04.16 10:36
Loading ...
Loading ...
Loading ...