Loading ...
Loading ...
Loading ...
Page 13 of 16
MAINTENANCE
CLEANING
Please shut off the unit and unplug from the mains before cleaning or performing any
maintenance
CLEAN THE SURFACE
Clean the plastic housing with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage.
AIR FILTER CLEANING
a) Clean the air filters every 2 weeks. If the air filter is blocked with dust, the unit’s performance
will be significantly affected.
b) Disconnect the power plug from the socket before dismantling, assembling or cleaning
c) Pull out the filters as shown in the pictures below.
d) Wash the mesh air filters by immersing them in warm (about 40℃) water with a neutral
detergent.
e) Rinse it and then dry it thoroughly.
f) Carefully re-install air filters back into the unit.
END OF SEASON MAINTENANCE
1. Pull out the plug from the drainage hole and empty the internal tank. You can also drain the
water by leaning the unit.
2. Then switch the unit to low fan mode.
3. Keep the unit in this mode for half day - until the conduit is dried. Doing this helps to keep
the inside of the unit dry and prevents mould developing
4. Turn off the unit and pull out the plug.
5. Coil the wire and bind it together, then put it into the accessories space.
6. Separate the air-exhausted pipe and store it safely.
7. Cover the unit and keep it in a dry place.
8. Take the batteries out of remote control and store, or dispose, them safely
9. Keep all accessories with the unit ready for next season.
Loading ...
Loading ...
Loading ...