Loading ...
Loading ...
Loading ...
Page 12 of 16
WATER-DRAINAGE
MANUAL DRAINAGE:
1. When the internal water tank is full the unit
will stop working and display the message
“FL” on the display.
2. Shut off the unit and unplug. Try not to move
the model abruptly as this may cause water
to spill out from internal water tank.
3. Place a tray under the water plug.
4. Unscrew the water plug and unplug the
water blocker - water will drain from the
internal tank.
5. Place the water blocker back in position and
screw the water plug back into place
CONTINUOUS DRAINAGE:
1. Unscrew off the water plug and unplug the water blocker.
2. Use a water pipe to connect to the water outlet.
3. You can plumb this pipe into your current plumbing system, lead it outside or use a
water pump.
Note: This model has a self-evaporative function, which reduces the need to empty the
water tank. If the unit is vented correctly most of the water is reused to cool the condenser
coils and any excess is evaporated. Please do not use continuous drainage if you intend to
use the self-evaporating facility. In heating or dehumidifier mode you may need to use the
permanent drainage.
Loading ...
Loading ...
Loading ...