Loading ...
Loading ...
Loading ...
CAUTION
The compressor is located on the left side of the
appliance, on the same side as the controls. This
side of the appliance will be heavier and more
awkward to manipulate. Inadequate support on
the control side of the appliance can result in
personal injury and damage to the appliance and
your property. It is recommended that you have
someone assist you during the installation of this
appliance.
CARE & MAINTENANCE
AIR FILTER
The air fi lter should be cleaned approximately every
2 weeks. The air fi lter may require more frequent
cleaning if there is signifi cant dander or fur in the
air.
Follow the steps below to clean the fi lter and return
the appliance to normal functioning. Ensure that the
program selector dial is turned to “OFF” and that
the power cord is unplugged.
1. The air fi lter is located behind the front intake
grill. To remove the air fi lter, grasp the fi lter tab
on the right side of the grill and slide it out to the
right.
2. Use a vacuum cleaner with a soft brush
attachment to remove any large debris or dust
build up from the air fi lter.
3. Wash the fi lter in lukewarm, soapy water, below
40°C (104°F), or use a neutral cleaning agent.
4. Rinse the fi lter with clean water and dry
thoroughly before reinstalling in the appliance.
Note: Do not operate the appliance without the air
fi lter installed.
CLEANING
To avoid possible electric shock, ensure that the
appliance is unplugged before performing any
cleaning or maintenance.
The outside of the appliance can be wiped clean
with a soft cloth or with a lukewarm, damp cloth if
necessary.
Do not use gasoline, benzene, thinner or any
other chemicals to clean this appliance as these
substances can cause damage to the fi nish and
deformation of plastic parts.
Never pour water directly onto the appliance as this
will cause deterioration of electrical components
and wiring insulation.
END OF SEASON CARE
Before removing the appliance from service for the
year, operate the appliance on high fan mode for
half a day to ensure the inside of the appliance
is dry. This will help avoid the growth of mold or
mildew inside the appliance. Ensure the fi lter is
clean and dry. Store the appliance covered in a dry
location.
Note: When installing or removing the appliance
from the window, ensure that caution is taken to
prevent it from falling backward. It is recommended
that installation or removal is completed with
assistance to prevent injury to persons or damage to
property or the appliance.
DISPOSAL
Check for local regulatory compliance regarding
approved and safe disposal of this appliance.
11
Specifi c electrical requirements are shown in the
diagram below. Follow the requirements below for
the type of plug on the power supply cord.
Wiring Requirements Power Supply Cord
• 115 Volt (103 min - 127
max)
• (0-8 amps)
• (10 amp time-delay fuse
or circuit breaker)
• Use on single outlet
circuit only
Loading ...
Loading ...
Loading ...