Loading ...
Loading ...
Loading ...
To do a check of the air intake
1. Make sure that the air intake is not blocked on any
side on the product.
2. Stop the product and remove leaves or unwanted
material if necessary.
CAUTION: A blocked air intake
decreases the blowing capacity of the
product and increases the motor's
working temperature. This can result in
motor failure due to overheating.
To examine the battery and the
battery charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the battery charger connection wire
is intact and that there are no cracks in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
Troubleshooting
Troubleshooting of the product
Starting failure Possible faults Possible action
The product does not start.
Low battery voltage Charge the battery.
Recently changed battery.
Move ON/OFF switch lever to
OFF position and then to ON po-
sition to start the product again.
The product has not been in operation for
more than 30 minutes.
Troubleshooting of the battery
and/or charger
Troubleshooting the battery and/or the battery charger
during charging.
Troubleshooting does not include the backpack battery,
refer to separate manual.
Battery
LED display Possible faults Possible action
Green activate LED flashing Low battery voltage. Charge the battery.
Error LED flashing The battery is discharged. Charge the battery.
Temperature deviation. Use the battery in surroundings where tem-
peratures are between -10°C (14°F) and
40°C (104°F).
Error LED is lit Permanent battery error Speak to your servicing dealer.
12 800 - 001 - 31.08.2018
Loading ...
Loading ...
Loading ...