Loading ...
Loading ...
Loading ...
Installation
15
Door removal
Remove the
freezer
compartment
door
Remove the
refrigerator
door
1) Removing the hinge cover by loosening the
screws. Separate all connection wires.
2) Remove the keeper by rotating it counter
clockwise (c) and then lifting the upper hinge
up (d).
3) Remove the freezer compartment door by lifting it
upward. This time, the door should be lifted
enough for the feed water pipe tube to be
completely pulled out.
1) Loosen the hinge cover screws and
remove the cover. Remove connection
wire.
2) Remove keeper by rotating it clockwise (c)
and then remove the upper hinge by lifting
it up (d ).
3) Remove the refrigerator compartment door
by lifting it up.
•
When removing the upper hinge, be careful that
the door does not fall forwards.
NOTE
•
Do not remove the grease on the surface of gasket or hinge.
NOTE
•
Move the refrigerator compartment door passing through the access door and lay it
down, but be careful not to damage the feed water pipe tube.
NOTE
Lower hinge
Connection
wires
Keeper
Upper hinge
Keeper
Upper
hinge
Electric Shock Hazard
Disconnect electrical supply to refrigerator
before installing. Failure to do so could
result in death or serious injury.
If your access door is too narrow for the
refrigerator to pass through, remove the
refrigerator door and pass the
refrigerator laterally.
The Door handles may also be removed if necessary to pass through a door opening,
before considering removing the doors. See page 16 for handle removal instructions.
Feed water tube
Lower hinge
Engough for
water feed pipe tube
to be completely
pulled out
WARNING
Connection
wires
Hinge
cover
Upper
hinge
Loading ...
Loading ...
Loading ...