Loading ...
Loading ...
Loading ...
5
Step 1 Set up your TV
Ready for the step-by-step? You’re only minutes away from TV bliss!
Remove your TV from the box
To use the stand
Be careful, it’s heavy!
To mount your TV on a wall, skip to page 6.
A
Carefully remove the foam packaging on the top side of the TV. Keep the bottom foam
packaging attached as shown in Image #1. On the foam packaging left, remove the stands
from the grooves located on the top corners of each side.
B
Remove the four (4) screws from the two bigger stands. Insert the stick stands
*into* the holes
of the bigger stands as shown in Image #2. Screw in the four (4) screws back into the holes to
secure the stands together.
C
Insert the stands *into* the holes where the plastic covers were removed in the previous step.
Carefully align the stands with the screw holes on each side of the TV.
Screw in the eight (8) screws
you removed in step #3 back into the mounting holes to secure the stands to each side of the TV.
Before moving the TV to its preferred and final location, two
(2)
people should lift the TV enough
to allow the third person to remove the bottom foam packaging.
D
DC
Plastic covers
& Stand screws (M5x18mm)
1 2
3 4
Note: We recommend having three (3) people help to safely install the stands. While two (2)
people securely hold the TV upright, another person should install the stands. Make sure
the direction and position of each stand follows the illustrations as shown in the images
below.
TV stands
B
Screws
M5x18mm
A
Carefully remove the foam packaging on the left and right sides of the TV. Keep the bottom
foam packaging attached as shown in Image #3. On the back of the TV, remove the eight (8) stand
screws from the mounting holes located on the lower corners of each side. And remove the six (6)
plastic covers from the stand holes on each side of the TV (refer to the objects marked “C” in
Image #3). Put them away for future needs.
Loading ...
Loading ...
Loading ...