Loading ...
Loading ...
Loading ...
86
S
ETUP MENU
LCD MONITOR BRIGHTNESS
Monitor brightness can be adjusted in 11 levels.
Brightness can be set individually for viewfinder
and direct viewing in the recording mode. Turn the
mode switch to the appropriate position before
opening the brightness option in section 1 of the
setup menu (p. 85). Also see page 28.
Use the left/right keys of the controller to adjust
brightness, the monitor image changes
accordingly. Press the central button of the
controller to set the level.
AUTO POWER SAVE
To conserve battery power, the camera will shut down if no operation is made within a
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or 10
minutes. When the camera is connected to a computer, the auto-power-save period is
fixed at ten minutes. Auto power save is set in section 1 of the setup menu (p. 85).
An image can be displayed on the monitor after it is captured.
When used with the continuous-advance or progressive-
capture drive modes (p. 47, 48), the images in the series are
played back in a six-frame index display. Instant playback is
activated section 1 of the setup menu (p. 85). A playback
period of two or ten seconds can be selected. To cancel the
playback and save the image before the end of the playback
period, press the shutter-release button partway down.
INSTANT PLAYBACK
Single still images can be previewed immediately after being captured without instant
playback active. Simply continue to hold the shutter-release button down after taking
the picture to display the image. Release the shutter button to end the playback.
Camera Notes
Set LCD brightness
:adjust
:enter
Low High
Loading ...
Loading ...
Loading ...