Loading ...
Loading ...
Loading ...
Troubleshooting en
43
Fault Cause troubleshooting
Rust spots on cutlery. Cutlery is not sufficiently
rust-resistant. Knife blades
are often more severely af-
fected.
▶
Use rust-resistant tableware.
Cutlery may also rust if
washed together with rust-
ing items.
▶
Do not wash rusting items.
Salt content in washing wa-
ter is too high.
1. Remove any spilled special salt
from the tub.
2. Screw the cap of the special salt
dispenser on tight.
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
▶
Check that the spray arms are not
blocked and can rotate freely.
Detergent dispenser was
damp when detergent was
added.
▶
Only add detergent to a detergent
dispenser when dry.
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for
rinse aid.
▶
Immediately add rinse aid to the
dispenser.
→"Adding rinse aid", Page24
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care
product used causes excess-
ive foaming.
▶
Change the brand of detergent.
Information on display panel
Fault Cause troubleshooting
Special salt refill indicator
lights up.
Insufficient special salt.
▶
Add Special salt →Page22.
Sensor does not detect spe-
cial salt tablets.
▶
Do not use special salt tablets.
Refill indicator for special
salt does not light up.
Water softening system is
switched off.
▶
Setting water softening system
→Page22
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add Rinse aid →Page24.
2. Set the amount of rinse aid to be
dispensed.
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
→"Setting the amount of rinse aid",
Page24
Loading ...
Loading ...
Loading ...