Loading ...
Loading ...
Loading ...
Charging / Battery status
Connect the headphones to a computer or USB AC adapter (sold
separately) using the supplied dedicated USB cable to charge the battery.
.
PC
or
USB cable (supplied)
USB AC
adapter
The charging status can be checked from the charging LED on headphones.
Charging status Color of charging LED
Charging Red
.
Fully charged Green
.
0
When using the headphones for the first time after purchase or when the
remaining power of the rechargeable battery is low, charge the battery.
0
You can connect the headphones to a device using the supplied audio cable to
enjoy listening to music even if the battery is drained. (v p. 22)
0
The headphones can be used for approximately 20 hours of music playback when
fully charged.
0
It takes approximately 2 hours to fully charge the rechargeable battery from the
state of no remaining battery power.
0
You can listen to music from a paired Bluetooth device or make phone calls even
during charging. In this case, noise may occur in the audio from the headphones
depending on the type of computer used.
0
When the USB cable is connected to this unit, the headphones disconnect from
Bluetooth and enter charging mode. Reconnect to Bluetooth to start Bluetooth
playback again. (v p. 13)
0
The usable time of the headphones differs depending on the temperature of the
environment in which they are used and method of use.
NOTE
0
When connecting the USB cable to the USB port, be sure to match the cable
connector with the shape of the socket. Forcing the connector into the socket will
cause damage.
0
The rating of the charging output should be DC 5 V, 2.4 A or less.
Contents
Preparation Connections Operation Troubleshooting Appendix
8
Loading ...
Loading ...
Loading ...