Loading ...
Loading ...
Loading ...
9
•
Do not use any batteries other than
those
• Do not heat or disassemble batteries.
•
•
Do not carry or store batteries with
other metallic objects. Doing so could
could cause batteries to short circuit,
leak or explode.
•
Never recharge a battery unless it is
Placement
Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
• Before wall mounting, make sure the wall can support
the weight of your Soundbar.
• Before wall mount, you need not remove the rubber
feet at the bottom of the Soundbar, otherwise the
• Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a suitable
length and diameter.
• Please check whether the USB port on the back of the
Soundbar is connected to a USB device. If it is found
that the connected USB device aects the wall-mount,
you need to use another USB device of the appropriate
size.
Screw length/diameter
Suggested wall mounting height
You are recommended to install the TV rst
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0’’ in distance from the bottom of
the
TV.
1 Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
797 mm / 31.38”.
Secure the dowels and screws in the
holes.
2 Remove the screws (x4) from the main
unit.
3.5-4mm/0.14”-0.16”
4mm/
0.16”
>25mm/0.98”
Attach the wall brackets (x2) to the
main unit with the screws removed
from the main unit.
specied.
Never throw then in re or water.
conrmed to be a rechargeable type.
Place your SoundBar as shown below.
rubber feet cannot be xed back.
English
Loading ...
Loading ...
Loading ...