Loading ...
Loading ...
Loading ...
6
EN
|
WIRING & INSTALLATION
Stereo Setup Using 4 Conductor Burial Cable & Amplifier (Option 1)
Left
8 Ohm Stereo 2-Channel Amplifier
Right Left Right
Left & Right
Stereo Wiring Diagram (Option 2)
Left Right Left Right
4 Conductor Burial Wire
–
+
–
+
Black Red
Green White
+
–
–
+
4 Conductor Burial Wire
–
+
–
+
Black Red
Green White
+
–
–
+
Left
8 Ohm Stereo 2-Channel Amplifier
Left Left Left
Left & Right
Stereo Wiring Diagram (Option 1)
Right Right Right Right
The satellite speakers included in this system individually
present a 32 ohm load to the amplifier. When 4 of them
are connected on each amplifier channel in parallel,
the load to the amplifier is approximately 8 ohms. The
nominal impedance of the subwoofer is 8 ohms per
channel. The satellites and subwoofer feature optimized
internal crossovers so that the subwoofers impedance is not
combined with the satellites. The overall load presented to
your amplifier by the combined system of 8 satellites and 1
subwoofer will be around 8 ohms nominal per channel.
With these considerations in mind, multiple system wiring
possibilities are possible. The following diagrams are
simple, and safe examples of wiring the system to a
traditional 8 ohm stereo amplifier. If using an alternative
wiring or amplification configuration, please take care to
ensure that the impedance presented to your amplifier is
within its published specifications. Failure to adhere to the
above guidance could result in damage to the speakers
and/or the amplifier which MartinLogan will not take
responsibility for and will not be covered under warranty.
Loading ...
Loading ...
Loading ...