Faber DAMIS36SS300 Dama Isola 300

User Manual - Page 4

For DAMIS36SS300.

PDF File Manual, 24 pages, Read Online | Download pdf file

DAMIS36SS300 photo
Loading ...
Loading ...
Loading ...
TOOLS NEEDED FOR INSTALLATION













PARTS SUPPLIED FOR INSTALLATION


PARTS NEEDED FOR INSTALLATION




OPTIONAL ACCESSORIES AVAILABLE
High Ceiling Chimney Kit
Extends the island chimney for high
ceilings
part # HIGH2 - Stainless
*Ductless Conversion Kit
For non-vented installations only
* it is highly recommended that professional
style cooking always be vented to the
outside

Replacement Charcoal Filter
For non-vented installations only,

part # FILTER2
UNPACK THE RANGEHOOD


THIS TIME! This plastic covering protects the chimney from scratches during installation.
For safe packaging, the entire chimney section of the hood is shipped assembled. It must be disassembled completely for
installation. Disassemble packaged chimney components by sliding apart the chimney covers (B and C in FIGURE 1). Remove
(B) (F) by removing the 2 philips screws on the outside bottom
(C) (F) by removing the 2 philips
screws on the outside top of the chimney cover.
CALCULATE THE DUCTRUN LENGTH
The ductrun should not exceed 35 equivalent
feet if ducted with the required minimum of 6"

by adding the equivalent feet in FIGURE 2 for
each piece of duct in the system. An example
is given in FIGURE 3.
For best results, use no more than three 90°
elbows. Make sure that there is a minimum
of 24" of straight duct between elbows if
more than one is used. Do not install two
elbows together. If you must elbow right
away, do it as far away from the hood's
exhaust opening as possible.
9 Feet Straight Duct


Total System
FIGURE 3
3.0 feet
5.0 feet
12.0 feet
0.0 feet




FIGURE 2
9.0 feet
10.0 feet
0.0 feet
19.0 feet
PREPARING TO ATTACH THE CHIMNEY
The rangehood attaches to the ceiling by a
metal support structure (D in FIGURE 1). This
support must be attached to the ceiling before
the canopy is attached. This structure must

FOR WOOD CEILINGS:    
wood screws and washers.
FOR PLASTER OR SHEET ROCK CEILINGS:
If possible, the support must be attached to

behind the sheet rock must be built.
FOR WOOD SHELVES: G, H, &
I in FIGURE 1.
FIGURE 1

A. 
B. 
C. 
D. 
E. 
F. 
G. 
H. WOOD SHELF WASHERS
I. 
J. 
K. 
L. 
M. DAMPER
J
K
L
M
Loading ...
Loading ...
Loading ...