Loading ...
Loading ...
Loading ...
3
• To prevent accidental injury, the cord should be secured behind the ice maker and not left exposed
or dangling.
Connecting the Water Supply
• Not all the necessary hardware is provided for installation so you should hire a professional licensed
plumber to complete the installation.
• Connect tubing (supplied with unit) to the nearest cold water source. Connect sufficient tubing to
the unit to allow the appliance to be moved freely for cleaning and service. Also make sure that the
tubing is not pinched or damaged during transportation.
• Position the unit to allow free airflow through the front of the unit. Wipe out inside of unit and ice
bin with a damp cloth.
Reversing the Door Swing
This unit can be opened from either the right side or the left. By default, the door hinge is on
the right side. If you prefer it on the left, please follow these instructions:
NOTE: All of the parts (including the screws) that are removed must be kept for the
reinstallation of the door.
1.
Remove the three screws from the top hinge.
2. Remove the door from the lower hinge, and keep the padded surface upward to prevent
scratching.
3. Remove the two screws from the bottom hinge, then remove the bottom hinge.
4. Remove the three hole covers from the upper left side of the cabinet and use them to
cover the holes on the right side.
5. Unscrew the hinge pin from the top hinge, flip the hinge over, and reinstall the pin.
6. Reinstall the lower hinge on the opposite side.
7. Set the door on the lower door hinge. Reinstall the top hinge loosely and do not tighten.
8. Adjust the door so that it is straight. Once the door is in place correctly, tighten the
screws.
WARNING
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING.
YOU MUST USE A LICENSED PLUMBER.
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION.
Loading ...
Loading ...
Loading ...