Loading ...
Loading ...
Loading ...
6. Slide top end of each trim piece upward onto range side rails.
7. Push each trim piece into place at bottom of trim.
8. Use screws to attach each trim piece to range.
9. Replace oven racks.
10. Replace oven door by inserting ends of hinges into hinge
slots in the oven frame.
11. Push hinges in as far as they will go and open the oven door.
You should feel the oven door drop into place.
12. Rotate both hinge latches back to the locked position.
13. Check that the door is free to open and close. If it is not,
repeat the removal and installation procedures. See “Remove
Oven Trim” section.
14. Reconnect power.
15. Display panel will light briefly, and “PF” should appear in the
display.
16. If display panel does not light, please reference the
“Assistance or Service” section of the Use and Care Guide or
contact the dealer from whom you purchased your range.
Complete Installation
1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For range use and cleaning, read the Use and Care Guide.
Check Operation of Cooktop
1. Turn power on. “PF” should appear in the display.
2. Push in and turn each cooktop control knob to HI.
3. Check the operation of the cooktop elements and indicator
lights.
If cooktop element(s) does not operate, check the
following:
■ Household fuse is intact and tight; or circuit breaker has
not tripped.
■ Electrical supply is connected.
■ See “Troubleshooting” section in the Use and Care Guide.
4. Turn cooktop control knob to OFF.
Check Operation of Oven
1. Turn power on. “PF” should appear in the display.
2. Press CUSTOM BROIL. “BROIL” will appear in the display.
3. Press START/ENTER. Make sure the oven door is closed and
the “ON” light is shown in the display.
If oven element(s) does not operate, check the following:
■ Household fuse is intact and tight; or circuit breaker has
not tripped.
■ Electrical supply is connected.
■ See “Troubleshooting” section in the Use and Care Guide.
4. When oven has been on for 5 minutes, feel for heat:
If you do not feel heat or an “F” followed by a number appears
in the display, turn off the oven and contact a qualified
electrician.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the Use
and Care Guide or contact the dealer from whom you purchased
your range.
A. Oven trim
A
W10044940
©
2007.Whirlpool Corporation.
All rights reserved.
3/07
Printed in U.S.A.