Loading ...
Loading ...
Loading ...
9
ENCLEANING AND MAINTENANCE
CLEANING YOUR KETTLE
Unplug it.
Let it cool down and clean it with a damp sponge.
• Never immerse the kettle, its base, the cord or the electric plug in water:
the electrical connections or the switch must not come into contact with
water.
• Do not use scouring pads.
DE-SCALING
De-scale regularly, preferably at least once a month or more frequently if
your water is very hard.
• Using white vinegar: Fill the kettle with ½ l of vinegar. Leave to stand for
1 hour without heating.
• Using citric acid: Boil ½ l of water. Add 25 g of citric acid and leave to
stand for 15 minutes.
• Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
• Never use a de-scaling method other than that recommended.
IN THE EVENT OF PROBLEMS
THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE
• The kettle does not work or stops before coming to the boil
– Check that your kettle is properly connected.
– The kettle has been switched on without water or an accumulation of
scale has caused the overheat cut-out to operate: allow the kettle to
cool and fill it with water. Descale first if scale has accumulated.
Switch it on: the kettle should start working again after about 15 minutes.
IF YOUR KETTLE HAS BEEN DROPPED, IF IT LEAKS OR IF THERE IS
VISIBLE DAMAGE TO THE POWER CORD, THE PLUG OR THE BASE OF
THE KETTLE.
Return your kettle to your After-Sales Service Centre, only they are
authorised to carry out repairs.
See the guarantee conditions and list of centres in the booklet. The type
and serial number are shown on the bottom of your kettle. This guarantee
covers manufacturing defects and domestic use only. Any breakage or
damage resulting from failure to comply with the instructions for use is
not covered by the guarantee.
Loading ...
Loading ...
Loading ...