Loading ...
Loading ...
Loading ...
4
when the timer function is active.
Defrost Indicator Light
The DEFROST indicator light will illuminate when the frost has accumulated on the
interior of the dehumidifier. The dehumidifying function will cease until the frost has
melted. The frequent defrost process indicates that the ambient temperature is too cold.
Therefore, if the room temperature is lower than 60°F, please consider adding heat to
promote proper drying.
Full Bucket Indicator Light
The FULL indicator light will illuminate when the bucket is full of water, as a reminder to
empty the water bucket. Empty the bucket and re-install the bucket properly to resume
regular functioning.
LED Display
The DISPLAY will show the ambient humidity, set humidity, timer settings, and error
codes. (The ambient humidity reading is accurate within +/- 5%.)
Setting Button
• Keep pressing the SETTING button to adjust the set humidity.
• The humidity can be set between 30-80% in 5% increments. For drier air, set the
humidity to a lower number. For damper air, set the humidity to a higher number.
Speed Button and Indicator Light
Press the SPEED button to set the fan speed to low or high. If the HIGH indicator
light is on, the fan is set to high speed. If the LOW indicator light is on, the fan is
set to low speed.
3. General Operation
Note: This dehumidifier may have been tilted or placed upside down during shipping. To
ensure this dehumidifier works properly, please ensure this dehumidifier is upright for at
least 24 hours before initial use.
Step 1: Plug the power cord into a properly grounded 115 volt AC outlet.
Loading ...
Loading ...
Loading ...