Loading ...
Loading ...
Loading ...
•This function is typically used with
“cooking time” function.
For example if the dish has to be
cooked for 45 minutes and needs
to be ready by 12:30, simply select
the required function, set the
cooking time to 45 minutes and the
end of cooking time to 12:30.
•At the end of the cooking set time,
the oven will switch off
automatically and an audible alarm
will ring.
•Cooking will start automatically at
11:45 (12:30 minus 45 mins) and
will continue until the pre-set end-
of-cooking-time, when the oven
will switch itself off automatically.
WARNING.
If the END of cooking is selected
without setting the length of
cooking time, the oven will start
cooking immediately and it will
stop at the END of cooking time
set.
4.4 USE OF TOUCH CONTROL CLOCK PROGRAMMER
FUNCTION
HOW TO ACTIVATE IT
HOW TO SWITCH ITOFF
WHAT IT DOES WHAT IT IS FOR
KEY LOCK
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
•Child Lock function is
activated by touching Set (+)
for a minimum of 5 seconds.
From this moment on all other
function are locked and the
display will flash STOP and
preset time intermittently.
•Child Lock function is
deactivated by touching
touchpad Set (+) again for a
minimum of 5 seconds. From
this moment on all functions
are selectable again.
•Push the central button
1 times
•Press the buttons "-" "+"
to set the required time
•Release all the buttons
•When the set time as elapsed
an audible alarm is activated
(this alarm will stop on its own,
however it can be stopped
immediately by pressing the
button) SELECT.
•Sounds an alarm at the end of
the set time.
•During the process, the
display shows the remaining
time.
•Allows to use the oven as alarm
clock (could be activated either
with operating the oven or with
out operating the oven)
• Push the central button 2 times
• Press the buttons "-" or "+"to
set the lenght of cooking
required
• Release all buttons
• Set the cooking function with
the oven function selector
•When the time is elapsed the
oven will switch off
automatically.
Should you wish to stop cooking
earlier either turn the function
selector to 0, or set time to 0:00
(SELECT and "-" "+" buttons)
• It allows to preset the cooking
time required for the recipe
chosen.
• To check how long is left to run
press the SELECT button 2 Times.
• To alter/change the preset time
press SELECT and "-" "+"
buttons.
•Push any button to stop
the signal. Push the central
button to return to the clock
function
•At the time set, the oven
will switch off. To switch
off manually, turn the oven
function selector to
position O.
•Enables you to set the end of
cooking time
•To check the preset time push
the central button 3 times
•To modify the preset time
press buttons SELECT + "-" "+"
•Push the central button 3
times •Press the buttons "-"
"+" to set the time at which you
wish the oven to switch off
•Release the buttons
•Set the cooking function with
the oven function selector
WARNING : the first operation to carry out after the oven has
been installed or following the interruption of power supply
(this is recognizable the display pulsating and showing
12:00 ) is setting the correct time. This is achieved as follows.
4.3 SETTING THE CORRECT TIME
•Push the central button 4 times
•Set time with "-" "+" buttons.
•Release all buttons.
ATTENTION: The oven will only operate providing the clock is set.
00:00
select
09 GB
Loading ...
Loading ...
Loading ...