Loading ...
Loading ...
Loading ...
Servicing Your Honda
123
Engine Oil & Filter
9.
Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 184).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
10.
Install a new sealing washer (6) onto the drain bolt.
11.
Apply a thin coat of oil to a new O-ring (7) with oil and install into
the groove in the oil drain bolt.
12.
Reinstall the engine oil drain bolt and tighten it to the specified
torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
13.
Fill the crankcase with the recommended grade oil
approximately:
3.1 US qt (2.9 ℓ)
14.
Reinstall the oil fill cap.
15.
Start the engine and let it idle for 5 minutes.
16.
Stop the engine and after 2–3 minutes, check the oil level. Make
sure the oil is between the upper and lower level marks on the
dipstick. If necessary, add more oil but do not overfill.
17.
Reinstall the oil fill cap and dipstick.
18.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
(6)
(7)
(6) drain bolt sealing washer (7) O-ring
21YM TRX680FA5_31HS2610.book 123 ページ ２０２１年３月８日 月曜日 午前９時４６分
Loading ...
Loading ...
Loading ...