Loading ...
Loading ...
3
Side Shelf
Underside of
Side Shelf
Grub Screw
(Use Allen Wrench/Key to adjust)
1 Check that the cylinder valve is
OFF by turning clockwise.
3 After fitting the regulator it may
have assumed a position out of the
horizontal, this is not important,
DO NOT TWIST THE REGULATOR.
2 Using the correct spanner, tighten
the connecting nut as tight as
possible. Do not use a spanner on a
handwheel connection.
4 When gas is required, turn the cylinder valve anti-clockwise.
Leak test all connections before operating the appliance.
Bolt
(1/4-20 x 2”)
Ensure the bolt goes
through into the Grill
Head to secure
STEP 3
STEP 4
STEP 5
Bolt Installation
After head is in place, install the bolt (1/4-20 x 2”)
in the location shown.
NOTE: This bolt secures side bracket to grill head
assembly for added side shelf strength.
Apply Loctite 242 (blue) to the first 3-4 threads
prior to installation of this bolt.
Side Shelf adjustment
●
With extended use, the shelf may become
unleveled and needs to be readjusted.
●
In between the bracket where the shelf hinge
is, is an adjustment grub screw.
●
Grasping the shelf, carefully raise up the shelf
and hold while with other hand using a 3/32
allen wrench turn the screw to the desired
level.
Gas Hookup - LP
Attach LP gas line connector hose assembly (as shown in “LP Gas Hookup” section - Use/Care Guide) and then
connect to LP tank as shown.
Loading ...
Loading ...
Loading ...