Loading ...
Loading ...
Loading ...
(467,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
some tires can only be partially sealed or
not sealed at all, and this condition may
cause a loss of tire pressure. A loss of tire
pressure can affect vehicle handling,
leading to the loss of vehicle control.
After sealing the flat tire tempora rily,
change the tires with new ones as soon
as possible. We recommend that you have
the sealed tire changed by your nearest
SUBARU dealer. You may reuse the wheel
if the attached sealant is wiped off, but the
valve of the wheel must be replaced with a
new one. If you reuse the wheel without
replacing the valve, air may leak from the
valve.
For tire replacement, refer to “Tire replace-
ment” F11-36.
! Safety precautions when sealing flat
tire
Observe the following rules when sealing a
flat tire.
1) Sealing is possible
2) Sealing is not possible
WARNING
. Do not use the flat tire repair kit in
the following cases.
– The tire has already been
damaged as a result of being
driven in the under inflated
condition.
– The tire damage is not located
within the visible tread of the
tire.
– The tire damage is on the
sidewall of the tire.
– When the tire has been taken
off of the wheel.
– The wheel or the tire valve of
the flat tire is damaged.
– Two or more tires have been
punctured.
– The expiration date of the
sealant has passed.
– The tire is punctured by
pointed items such as nails
of 0.2 in (4 mm) or larger.
. When inflating the flat tire, if the
tire inflation pressure does not
reach the green zo ne of the
pressure gauge within 10 min-
utes, do not continue to seal the
tire. We recommend that you
contact your SUBARU dealer.
. Drive w ith caution and avoid
making sudden steering or driv-
ing maneuvers.
. Do not exceed a maximum speed
of 50 mph (80 km/h).
. Do not exceed a maximum driv-
ing distance of 125 miles (200
km).
. Do not use tire chains on a sealed
tire.
– CONTINUED –
In case of emergency/Flat tires
9-9
9
Loading ...
Loading ...
Loading ...