Loading ...
Loading ...
Loading ...
(210,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
– When your vehicle is tilted, such as
in case the vehicle has a flat tire or is
being towed
– Immediately after the engine has
started
. In the following conditions, the head-
light mode will not be automatically chan-
ged from the high beam to the low beam.
– When your vehicle passes an on-
coming vehicle suddenly in a blind
curve
– When another vehicle passes in
front of your vehicle
– When an oncoming vehicle or ve-
hicle ahead comes in and out of view
because of continuous curves, median
strips, roadside trees, etc.
. If the stereo camera detects the light of
the front fog lights of an oncoming vehicle,
the headlight mode may change from the
high beam to the low beam automatically.
. The headlight mode may change from
the high beam to the low beam, or the low
beam mode may continue, when affected
by a street light, traffic signal, illumination
of an advertisement board, or a reflective
object such as a road sign and signboard.
. The timing of the change of headlight
mode may differ due to the following
factors.
– the vehicle condition (e.g., the num-
ber of passengers or the weight of
loaded cargo)
– surrounding situatio n (e.g., the
movement and direction of an oncom-
ing vehicle or vehicle ahead)
– detection limitations of the camera
angle
& Headlight flasher
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works even
though the lighting switch is in the “
” (off)
position.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
Instruments and controls/Light control switch
3-68
Loading ...
Loading ...
Loading ...