Loading ...
Loading ...
Loading ...
cleaning and maintaining your washing machine _33
03 cleaning and maintaining
• If the “ECO Drum Clean” indicator on the display and the
lamp on the Cycle Selector are lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by performing the ECO Drum Clean course.
• If you do not perform the ECO Drum Clean course, the
“ECO Drum Clean” indicator on the display and the lamp
on the Cycle Selector are turned off. However, the “ECO
Drum Clean” indicator on the display and the lamp on the
Cycle Selector are turned on again after two washes are
performed. However, this will not result in a problem with the
washing machine.
• Although generally, the ECO Drum Clean Auto Alarm
appears once a month or so, the frequency may differ
depending on the number of times the washing machine is
used.
• Incaseofthealarm,pleasealsocleanthedebrislter
(refer to “Cleaning the debris filter” section on page
34). Otherwise the performance of the bubble function
may lower down.
1. Unplug the washing machine from the power supply.
2. Open the filter cover by pressing down and pulling its
handle.
3. Open the emergency drain cap by pulling it.
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
Remain water maybe more than you expected. Prepare
larger bowl.
6. Reinsert the emergency drain cap and the drain tube.
7. Replace the filter-cover.
WF0804W8N-02842G-09_EN.indd 33 2014/12/27 14:37:17
Loading ...
Loading ...
Loading ...