Loading ...
Loading ...
Loading ...
9 For more information, visit global.irobot.com
Braava jet
®
m6 Owner’s Guide 10
ENEN
Care and Maintenance
Cleaning the Sensors and
Pad Reader
Clean sensors on the bottom of
your robot with a damp cloth.
Cleaning the Wheels
Pull o any visible debris or hair that
gathers around the wheels.
Important: Do not spray cleaning
solution or water onto the sensors or
sensor openings.
Cleaning the Body of the Robot
Wipe clean with a damp cloth.
Cleaning the Tank
If you notice an odor from the tank
Fill the tank with warm water.
Do not use boiling water.
Close cap and lightly shake
the tank.
2
3
Remove the tank from your
robot mop.
1
Cleaning the Drip Tray
Remove the robot from the
charging station.
Thoroughly wash the pad with warm water.
Caring for Washable Cleaning Pads
1
2
3
4
Rinse the tank and repeat
as necessary.
Put your robot mop back onto the
charging station.
4
5
Clean the drip tray with a damp cloth or
with warm water in sink.
Dry thoroughly before reattaching
the drip tray to the charging station.
Note: You can clean your washable pads
two ways: either by hand washing, or in a
washing machine.
Hand Washing
Wash using the warm cycle, then air dry.
Do not put in dryer. Do not wash with delicates.
Machine Washing
Separate the drip tray by lifting it up
from charging station.
Loading ...
Loading ...
Loading ...