Dacor HPCT466GS/NG Professional Natural Gas Pro Cooktop

User Manual - Page 13

For HPCT466GS/NG. Also, The document are for others Dacor models: DTCT304G, DTCT365G, DTCT466G, HPCT466GB

PDF File Manual, 20 pages, Read Online | Download pdf file

HPCT466GS/NG photo
Loading ...
Loading ...
Loading ...
11
Proper Flame Appearance
When the unit is installed correctly, the flame burns
steadily and has a sharp, blue inner cone, the length of
which varies with the burner size.
The flame will be reduced by the Smart Flame™ feature
under the grate fingers to increase grate life.
Troubleshooting—If a Burner Does Not
Function Properly
:
Verify that power and gas are supplied to the cooktop.
Verify that the cooktop is plugged in and power is turned
on at the circuit breaker or fuse box.
Verify that the burners are properly seated.
If the burner continues to spark after ignition stops, have
a licensed electrician check the electrical outlet for proper
grounding or reversed polarity.
Re-perform Running the Ignition Test (previous page).
If the appliance still does not work, contact Dacor
Distinctive Service: (800) 793-0093 x2822.
Do not attempt to repair the appliance yourself.
When you call, have the model and serial numbers avail-
able. (See the inside cover of this manual for the location
of these numbers.)
Dacor shall not pay to correct problems caused by a
faulty installation.
Installation Instructions
Installation Checklist
WARNING
The installer should complete this checklist to ensure
safe, thorough installation
The homeowner is responsible for the cooktop’s
proper installation, the importance of which cannot be
overstated.
The cooktop’s electrical outlet is installed as speci-
fied in this guide and according to applicable electrical
codes (Pg. 4).
Gas service to the cooktop is installed as specified in
this guide and according to applicable electrical codes
(Pg. 4).
Gas-supply-inlet pressure was measured and falls with-
in the maximums specified in this guide (Pg. 4).
The provided hold-down brackets secure the cooktop
(Pg. 9).
The installer connected the cooktop to the gas supply
as instructed in this guide and according to applicable
codes, and verified the gas supply has no leaks (Pg.
9).
Burners and grates are properly installed as specified
in this guide (Pg. 10).
Proper cooktop function was verified.
The warranty was activated (either online or by filling
out and mailing the warranty card).
Loading ...
Loading ...
Loading ...