Loading ...
Loading ...
Loading ...
5
Never use water to wash the compressor position,
wipe it with a dry cloth thoroughly after cleaning to
prevent rust.
Handle the appliance always with at least two
persons because it is heavy.
Install and level the appliance in an area suitable for
its size and use.
Make sure that the electrical information on the
rating plate agrees with the power supply. If it does
not, contact an electrician.
The appliance is operated by a 220-240 VAC/50 Hz
power supply. Abnormal voltage fluctuation may
cause the appliance to fail to start, or damage to
the temperature control or compressor, or there
may be an abnormal noise when operating. In such
case, an automatic regulator shall be mounted.
Only for UK: The appliance’s power cable is fitted
with 3-cord (grounding) plug that fits a standard 3-
cord (grounded) socket. Never cut off or dismount
the third pin (grounding). After the appliance is
installed, the plug should be accessible.
Make sure that mains cable is not caught under the
appliance during and after carrying/moving the
appliance, to avoid the mains cable becoming cut or
damaged. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Loading ...
Loading ...
Loading ...