Loading ...
Loading ...
Loading ...
ENG
11
DESCRIPTIONS
SOUND
SOURCE
EFFECT
LEVEL
VOL WOOFER
SOUNDBAR
SOURCE
Press to select a source connected to the Soundbar.
* BT PAIRING mode
To turn on BT PAIRING mode in Bluetooth function, press and hold the
SOURCE button for more than 5 seconds.
Play / Pause (BT / WIFI)
Press the
p
button to pause a music temporarily.
Press the
p
button again to play the selected music.
LEVEL
The ATMOS Soundbar has 3.1.2 channel sound. Use this button to adjust
the volume of each of the speakers. Press this button, use the Left/Right
buttons to select a speaker, and then use the Up/Down buttons to increase
or decrease the level (volume).
FL FR
FTRFTL
C
Main Unit
Speaker
Displayed on OLED when
adjusting the level
Front Left FL
Front Top Left FTL
Center C
Front Right FR
Front Top Right FTR
* Network Standby On/Off
Press and hold
the LEVEL
button for about 5 seconds
to turn the Network
Standby on or off.
(See page 31)
(Sound Control)
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the
Up/Down buttons to adjust the TREBLE or BASS volume from -3 ~ +3.
Press and hold the
(Sound Control) button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, and 10KHz are selectable (Left/Right) and each can be
adjusted to a setting between -6 ~ +6 (Up/Down).
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the
(Sound Control) button to sync the audio
with the video. Use the Up/Down buttons to set the audio delay between 0
ms ~ 300 ms. In BT mode, the Audio Sync function may not available.
Loading ...
Loading ...
Loading ...