Vornado HU1-0052-43 EV200 Evaporative Whole Room Humidifier with SimpleTank, 1.5 Gallon Capacity,

User Manual - Page 12

For HU1-0052-43.

PDF File Manual, 19 pages, Read Online | Download pdf file

HU1-0052-43 photo
Loading ...
Loading ...
Loading ...
12 English
REPLACING WICK
1. Turn humidifier Off and unplug.
2. Remove Water Tanks, then remove
humidifier body from base by lifting up.
3. Remove and discard used Wicks.
4. Install new genuine Vornado Wicks by
slightly bending the Wicks to match curve
of unit. Make sure Wicks fit flush against
bottom and side of humidifier.
5. Replace humidifier body and Water
Tanks. Your humidifier is now ready
for use.
Wicks contain an antimicrobial preservative.
Protection is limited to the product. Active
Substances: Cellulose (9004-34-6) and
Omadine Salts (13463-41-7). Wash hands and
avoid touching eyes after handling wick.
AUTOMATIC REFILL PROGRAM
Select the shipment interval and Vornado will send replacement
Wicks automatically. Eliminate the hassle of remembering to
reorder. Maintain the high efficiency of your Vornado humidifier.
To sign up, visit vornado.com, email
1-800-234-0604. Cancel anytime.
REPLACING WICK
Part # MD1-0034
While your humidifier came equipped with a Wick, you will eventually have to replace it, as they last approximately 4–8 weeks, depending
on use. Many factors affect the life of the Wicks, including amount of use, water hardness and outside environmental factors. You will know
the Wick needs to be replaced when it becomes hard and is no longer absorbing the water effectively. Replace the Wick with a genuine
Vornado
®
Wick. While other brands may fit our units, these wicks do not carry the same quality and life as our own and may diminish the
humidifier’s performance.
The additional sodium in chemically softened water may cause Wicks
to harden. Try using untreated or tap water. Hard water or water with
excessive minerals, such as lime or iron, may shorten Wick life. Try
Bacteriostat or Water Treatment found at most hardware or home
specialty stores or clean the Wick. See CLEANING for instructions.
On first use, the Wick may give off a mild odor. The odor is not
harmful and will go away after the first few hours of operation. If the
odor is exceptionally strong, you can help eliminate most or all of
it by soaking the Wick in a solution of 2 teaspoons of white vinegar
and one gallon of water for 20–30 minutes. Rinse thoroughly in cool
water. Allow excess water to run off and dry before replacing in the
Base. DO NOT wring.
Loading ...
Loading ...
Loading ...