Loading ...
Loading ...
Loading ...
www.BISSELL.com
5
A
Product View
1 Clean Water/Formula Tank
2 Dirty Water Tank
3 Power Button
4 Hose Clip
5 Float Stack
6 Flexible Hose
7 Power Cable
8 Quick Release™ Cable Wrap
9 Small Tough Stain Tool
10 Secondary Tool Storage Clip
11 Hose Grip
12 Large Tough Stain Tool
13 BISSELL SPOTCLEAN BOOST
Oxygen Boost Formula
14 BISSELL 2X SPOTCLEAN
Spot & Stain Formula
C
Operations
Getting ready
1. To fill clean water/formula tank
a. Remove tank by lifting it straight
up and away from unit.
b. Pull on black tab to reveal tank
opening. The plug rotates out of the
way for easy filling.
c. Your tank is marked for a large stain
or a small stain. Based on your cleaning
need, fill with hot tap water to the water
fill line. Add Oxygen Boost formula to
the OXYgen Boost fill line. Add BISSELL
2X formula to formula fill line. DO NOT
BOIL OR MICROWAVE WATER.
d. Replace plug by rotating into place
and pressing gently onto tank.
e. Replace tank by lining up tank
bottom with indentations on machine.
Press down firmly on tank to secure
in position.
2. Release hose from hose grip bracket.
Unwrap hose completely from around unit.
3. Insert desired tough stain tool on end of
hose until it clicks into place.
4. Twist the Quick Release™ cable wrap
clockwise to unwrap power cable completely.
Pre-treat
Cleaning effectiveness will be enhanced if
you pre-treat heavily stained or highly soiled
areas. Here’s how to do it.
1. Hold cleaning tool just above surface of
carpet or upholstery to be cleaned. Press
spray trigger to release a spray of cleaning
solution directly onto stained or soiled area.
2. Wait 3-5 minutes before cleaning.
B
Assembly
1. Slide hose clip into opening on front of
machine. You will hear a “snap” when it is
locked into place.
2. Snap hose grip bracket into back of
machine on clean tank side. Wrap hose
around the unit and snap hose grip
into bracket. Attach small tough stain tool
to end of hose grip.
3. Snap secondary tool storage clip into
back of machine between cord wrap and
hose grip bracket. Place large tough stain
tool onto storage clip.
4. Attach cable wrap by snapping it into
place on dirty tank side of machine. Wrap
power cable around cable wrap.
Cleaning Formula
Always use genuine BISSELL deep
cleaning formulas for portable spot cleaners.
Non-BISSELL cleaning formulas may harm
the machine and will void the guarantee.
Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all instructions
and operating procedures.
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning formulas
intended for use with the portable spot cleaner.
Keep spray away from face. Failure to do
so may result in personal injury.
Use only BISSELL portable/compact machine formula
in your cleaner. Use of cleaning formulas which
contain lemon or pine oil may damage this appliance
and void the guarantee. Chemical spot cleaners or solvent-based soil
removers also should not be used. These products may react with the
plastic materials used in your cleaner, causing cracking or pitting.
Loading ...
Loading ...