Tefal ZE811D34 Jamie oliver

User Manual - Page 11

For ZE811D34.

PDF File Manual, 80 pages, Download pdf file

Loading ...
Loading ...
Loading ...
8
Place the lid (C) on the juice collector (E) (outlet to the rear). (see Fig. 3)
Position the 2 locking clips (H) on the lid (C). Make sure the 2 locking clips are properly
clipped to the lid. (see Fig. 4)
Place the pulp collector (G) at the back of the appliance by tilting it forward slightly and
then sliding it under the lid (C). (see Fig. 5)
If you want to separate the juice from the froth, insert the froth separator (M) in the
juice jug (N). Place the lid (L) on the juice jug (N). (see Fig.6a)
Place the stainless steel grid (P) on the drip tray (Q). Place this whole unit on the Motor
unit in the appropriate slot.
Place the juice jug (N) under the spout at the front of the appliance. (see Fig. 6b)
Plug the juicer in. The cord storage (R) lets you adjust the length of the cord.
What speed to use?
Ingredients Speed
Approximate weight
(kg)
Quantity of juice
obtained in cl (*)
1 glass = 20 cl
(approximately)
Apples
Pears
Carrots
Cucumbers
Pineapple
Grapes
Tomatoes
Celery
2
2
2
1
2
1
1
2
1
1
1
1 (about 2 cucumbers)
1
1
1.5
1.5
65
60
60
65
60
60
65
60
An inappropriate choice of speed can lead to the abnormal vibration of the unit.
(*) The quality and quantity of juice varies widely depending on the harvest date and
variety of each vegetable or fruit. The quantities above are therefore approximate.
Turn the unit on using the control button (I).
Introduce the fruit or vegetables through the feeder tube (B).
Fruits and vegetables should be introduced with the motor running.
Slide the pushrod (A) in the feeder tube (B) by aligning the groove with the small notch
on the side.
Do not push down on the pushrod too hard. Do not use any other utensil. Do NOT push
with your fingers.
When you have finished, stop the appliance using the control button (I) and wait for
the filter to stop completely (D).
When the pulp collector (G) is full or when the juice start to flow more slowly, empty the
pulp collector (G) and clean the filter (D).
Loading ...
Loading ...
Loading ...