JL Audio 96281 Dominion d108 Black Ash 8" Powered Subwoofer

User Manual - Page 22

For 96281.

PDF File Manual, 128 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
| d108 & d110Page 22
WARNING! TURN OFF THE DOMINION™(s) AND ALL OTHER EQUIPMENT
IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
WARNING
OROR
DOMINION™ REAR PANEL
DOMINION™ REAR PANEL
STEREO RECEIVER
STEREO RECEIVER
R
L
TO SATELLITE
SPEAKERS
HIGH LEVEL
INPUT PLUG
(L) (R)
+
+
SPEAKER
OUTPUTS
SPEAKER
OUTPUTS
R
L
+
+
CH. 1
(
L
)
CH. 2
(
R
)
HIGH LEVEL
INPUT PLUG
CH. 1
(
L
)
CH. 2
(
R
)
TO SATELLITE
SPEAKERS
(R)
(L)
SYSTEM CONNECTION DIAGRAM 5:
Connecting one Dominion™ to a
Receiver via the Speaker Level Inputs
e Dominion features speaker level
inputs designed to accept the output of an
amplied source, such as a stereo receiver’s
speaker outputs. e use of this feature is
only recommended when no suitable line-
level signal is available.
When connecting a single Dominion
in mono to a two-channel receiver’s speaker
outputs, you will use both the Le and
Right connections on the “Speaker Level
inputs plug of the Dominion. Use good-
quality speaker cables (up to 12 AWG / 3
mm
2
) to make these connections. Make
sure you capture all the wire strands in
each connector port and do not allow any
of these wires to short together.
You can make the connections to
the Dominionsubwoofer’s inputs at
the receiver’s output terminals, or at
the main speakers, whichever is more
convenient. On receivers with A/B speaker
circuit selectors, you can connect the
Dominion to the “B” outputs, giving
you the ability to easily switch the
subwoofer’s signal on and o with the
receiver’s speaker circuit selector switch.
e input section of your Dominion
will sum the le and right inputs to mono
and apply low-pass ltering to feed the
subwoofer’s internal amplier when the “LP
Filter” of your Dominionis switched “on.
Because the main speakers are being
fed in parallel with the inputs of the
Dominion, they continue to operate as
full-range speakers. Any adjustment of the
“LP frequency (Hz)” knob will only aect
the sound of the Dominion, not the
main speakers.
Loading ...
Loading ...
Loading ...