Loading ...
2
WARNING
Read and Save These Instructions.
Approved for Residential Appliances only.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
INSTALLER: Please leave these Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
Turn o power circuit at service panel and lock out panel before installing this kit to the appliance.
Installation must comply with all local codes.
RECIRCULATING KIT model HIREC5UC
(Only for island range hoods)
PACKAGING CONTENTS
• Airdeector
• Charcoal Filter
• 2 Assembly screws
INSTALLATION INSTRUCTIONS
• After the duct cover bracket has been installed on the ceiling
(Refer to Installation Instructions in the Hood Manual), assemble
theairdeectortotheductcoverbracketwith2assemblyscrews,
asisshowning.1.
• Measurefromthebottomoftheairdeectortothebottomofthe
hoodoutlet,asisshowning.2.Cuttheductworkatthe
measured dimension.
• Uninstalltheairdeectorremovingthe2assemblyscrews.
• Sliptheductontothebottomofthedeector.
• Placetheassembleddeectorandductworkovertheexhaust
outlet from the hood.
• Assembletheairdeectortotheductcoverbracket,withthe2
assembly screws provided.
• Useducttapetosealthedeectorandtheexhaustoutletfrom
the hood, as is shown in the following image. The duct tape must
be approved for this application. Fig 3.
CHARCOAL FILTER INSTALLATION
• Removethegreaselterofthehood(a).
• Positionthecharcoallterinsidethestructureofthemotoras
shown in picture b.
• Reinstallthegreaselterontothebottomofthehood(c).
Air
deector
Duct cover
bracket
Dimension
to measure
Airow
Duct tape
over seams
Ductwork
Hood
FIG. 1
FIG. 2
FIG. 3
a) b) c)
Loading ...
Loading ...
Loading ...