Loading ...
Loading ...
Loading ...
37
350077
Problem/error Cause What to do ...?
The dryer does not work. •No voltage in the power
outlet
•Check if the power cord plug
is correctly inserted into the
power outlet.
•Check the fuse.
There is voltage in the
outlet, but the drum
does not spin and the
dryer does not work.
•Program was not started
in accordance with the
instructions.
•The door is not properly
closed.
•Condensate tank is full
(condensation dryer only).
•Delayed start function has
been selected.
•Reread the instructions for use
again.
•Push the door towards the
appliance.
•Empty the condensate tank
(see section Cleaning and
Maintenance).
•Wait until delayed time elapses.
Laundry is not dried, or
drying temperature is
longer than 4h.
•Filters are not clean. The
room is not sufficiently
ventilated.
•Inappropriate temperature
in the room.
•Laundry was not sufficiently
wrung or spun.
•Amount of laundry dried in
the appliance is too large or
insufficient.
•Clean the filters.
•Install the dryer in an
appropriate room (see section
Installation ...)
•Check if the temperature in
the room where the dryer is
installed is too high (over 25°C)
or too low (below 5°C).
•Check the length of the
evacuation tube - max. 2 m
(only for air vented model of the
dryer).
•Laundry inserted into the dryer
was not sufficiently wrung or
spun, or an inappropriate drying
program was selected.
•Use an appropriate program or
use the timed program. Increase
the final level of dryness for the
selected program (intensive
drying function).
Poor condensation
(condensation dryer
only)
•Inadequate location of the
dryer.
•Check whether the ambient
temperature of the room is not
too high.
•Check whether the condenser is
clean.
Unevenly dried laundry. •The amount of laundry
dried at a time is too large.
•Drying the pieces of
different thicknesses
•Drying the different types
of laundry
•Make sure the laundry is sorted
by type and size of items given
the selected program (see
section Drying – Preparing
the Laundry and the Program
Table).
Error in the drum
lighting.
•There is no lighting when
the dryer door is opened.
•Disconnect the dryer from
the power mains and call an
authorized service unit.
When all lamps are blinking switch the appliance off and call nearest authorized service
shop (assistance center).
Loading ...
Loading ...