Loading ...
Loading ...
Loading ...
GUI Menu Map Playback Information Troubleshooting
s
Audyssey Settings
Select Room EQ, Dynamic EQ and Dynamic Volume.
Room EQ
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers
to flat response.
Manual
: Apply frequency response set with “Manual
EQ”.
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
Press ROOM EQ.
Audyssey Audyssey Byp. L/R
Audyssey Flat
Manual
OFF
• When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is
selected, “ ” lights.
• After running Auto Setup, if the Speaker Configuration, Distance,
Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only “ ”
lights.
• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
• After performing “Auto Setup”, the “Room EQ” setting automatically
becomes “Audyssey”.
• If the settings of speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”
and “Audyssey Flat” cannot be selected. Either perform Auto Setup
again, or return to the setting after running Auto Setup with “Auto
Setup” – “Parameter Check” – “Restore”.
• When using headphones or analog EXT. IN mode, “Room EQ”
cannot used.
Dynamic EQ
Audyssey Dynamic EQ™ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human
perception and room acoustics.
Audyssey Dynamic EQ works in tandem with Audyssey MultEQ
®
XT
to provide well-balanced sound for every listener at any volume level.
[Selectable items]
ON
: Use Dynamic EQ function.
OFF
: Do not use Dynamic EQ function.
Operating from the main unit or main remote
control unit
Press <DYNAMIC EQ> or [PARA].
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
Dynamic EQ / Volume : OFF
• “Dynamic EQ” can only be set when auto setup has been performed.
• After performing “Auto Setup”, the “Dynamic EQ” setting
automatically becomes “ON”.
• “Dynamic EQ” cannot be set in the following situations.
⋅ If “Auto Setup” fails to be completed.
⋅ After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
• When “Room EQ” is set to “OFF” or “Manual”, “Dynamic EQ” is
automatically set to “OFF”.
• Before running Auto Setup and after running Auto Setup, if the
number of speakers has increased or you pressed <DYNAMIC EQ>
or [PARA], “Run Audyssey” is displayed. In this case, either perform
Auto Setup, or return to the setting after running Auto Setup with
“Auto Setup” – “Parameter Check” – “Restore”.
n Operating conditions for each function
• Dynamic EQ : When “Room EQ” is set to “Audyssey”,
“Audyssey Byp. L/R” or “Audyssey Flat”
• Dynamic Volume : When “Dynamic EQ” is set to “ON”
• Setting : When “Dynamic Volume” is set to “ON”
Room EQ
Dynamic EQ
Dynamic Volume
Setting
NOTE
When you set “Dynamic EQ” to “ON”, “Tone” and “Night Mode”
cannot be used.
Setup
Dynamic Volume
Audyssey Dynamic Volume™ solves the problem of large variations
in volume level between television programs, commercials, and
between the soft and loud passages of movies.
Audyssey Dynamic EQ is integrated into Dynamic Volume so that as
the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity
remain the same.
[Selectable items]
ON
: Use Dynamic Volume.
The Dynamic Volume effect will be at the level of the
“Setting”.
OFF
: Do not use Dynamic Volume.
Operating from the main unit or main remote
control unit
Press <DYNAMIC EQ> or [PARA].
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
Dynamic EQ / Volume : OFF
Loading ...
Loading ...
Loading ...