Loading ...
Loading ...
Loading ...
14
GUI Menu Map Setup Information Troubleshooting
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• With the default settings, the iPod can be used connected to the
VCR (iPod) connector.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is “Mode3”.
• Press <ON/STANDBY> or [POWER OFF] and set the AVP-A1HDCI /
AVR-5308CI’s power to the standby mode before disconnecting the
iPod. Also switch the input source to one to which the GUI menu
“iPod dock” is not assigned before disconnecting the iPod.
iPod
®
Playback
The music on an iPod can be played by using the Control Dock for
iPod (ASD-1R or ASD-11R, sold separately).
The operation can also be performed using the buttons on the main
unit or remote control unit while watching the GUI menus.
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.
1
Make the necessary preparations.
q Set the iPod in the DENON Control Dock for iPod.
(vSee the Control Dock for iPod’s operating instructions.)
w Assign the Control Dock for iPod’s input.
w
Assign the Control Dock for iPod’s input.
: “Source Select” – “(input source)” – “Assign” –
“iPod dock”
2
Either turn <SOURCE SELECT> or press [iPod] (AMP
mode) to select the input source assigned in step 1-w
above.
– GUI screen –
Music
[1/6]
Playlists
Artists
Albums
Songs
Composers
Genres
iPod
[1/2]
Music
Videos
(When using an ASD-1R) (When using an ASD-11R)
b When using the ASD-11R, “Music” and “Videos” folders appear
in the Top menu.
b When communication between AVP-A1HDCI / AVR-5308CI and
iPod is complete, the relevant GUI screen is displayed. If the
screen is not displayed, the iPod may not be properly connected.
Try connecting again.
Try connecting again.
: “Source Select” – “(input source)” – “Play”
(vpage 6)
Basic Operation
3
To operate using the main remote control unit, set the
remote control unit to the iPod mode.
4
Press [SEARCH] and hold it down for a 2 seconds or
more to select the display mode.
To switch between modes, press and hold down the button.
When remote mode is active, “Remote” is displayed.
[Display mode]
Browse mode Remote mode
Display location Main unit display
iPod display
Playable
files
Audio file
S S
Video file
S
z
1
S
z
2
Active
buttons
Remote
control unit
(AVP-A1HDCI /
AVR-5308CI)
S S
iPod
A S
z
1
: When using an ASD-11R control dock for iPod.
z
2
: Video may not be output, depending on the combination of
ASD-1R and iPod.
Listening to Music
1
Use ui to select the search item or folder, then press
ENTER or p.
b When using the ASD-11R, select “Music” on the Top menu.
2
Use ui to select the music fi le, then press ENTER or
p.
Playback starts.
Playback
ENTER
uiop
<SOURCE SELECT>
<ON/STANDBY>
<STATUS>
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
[SEARCH]
uiop
[POWER OFF]
[ iPod]
[CHANNEL
+ –
]
ENTER
[8],[9],
[6],[7],
[1],[2]
[REPEAT]
[8]
[2]
[RANDOM]
[SEARCH]
[9]
[1/3]
(Main remote control unit)
(Sub remote control unit)
[iPod]
[ AMP]
<Illustration : AVR-5308CI>
(AMP mode)
Loading ...
Loading ...
Loading ...