UBD-M7500
FULL MANUAL
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register
2 English
Safety Information
Class II product : This symbol
indicates that a safety connection
to electrical earth (ground) is not
required.
AC voltage : Rated voltage
marked with this symbol is AC
voltage.
DC voltage : Rated voltage
marked with this symbol is DC
voltage.
Caution. Consult instructions
for use : This symbol instructs
the user to consult the user
manual for further safety related
information.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from over heating,
these slots and openings must never be
blocked or covered.
- Do not place this apparatus in a confined
space, such as a bookcase or built-in cabinet,
unless proper ventilation is provided.
- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized
Samsung dealer or service center immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
Warning
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make
any kind of contact with any internal part
of this product.
This symbol indicates that this product
has included important literature
concerning operation and maintenance.
3 English
01 Safety Information
• Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
• If this apparatus does not operate normally -
in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorized Samsung dealer or
service center.
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
• Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage to
your product.
• Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric shock
or equipment damage. (Class 1 Equipment
only)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
• Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a Samsung service center.
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• WARNING
- To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
4 English
Safety Information
CAUTION (for Canada)
This equipment complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
This device and its antenna(s) must not be co-
located or operation in conjunction with any other
antenna or transmitter.
This device may automatically discontinue
transmission if there is no information to transmit,
or an operational failure. Note that this is not
intended to prohibit the transmission of control or
signaling information or the use of repetitive codes
where required by the technology.
This Class B digital apparatus complies with
Canadian ICES-003.
Note to CATV system installer
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian
Electrical Code, Part I) that provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building as close to the
point of cable entry as practical.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER.
DO NOT REPAIR THE PRODUCT YOURSELF.
REFER SERVICING TO QUALIFIED
PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
| NOTE |
\
If the Region number of an Ultra HD Blu-ray
Disc/Blu-ray Disc/DVD does not correspond to
the Region number of this product, the product
cannot play the disc.
5 English
01 Safety Information
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
6 English
Contents
SAFETY INFORMATION
2 Warning
5 Precautions
5 Important Safety Instructions
GETTING STARTED
8 Accessories
9 Front Panel
9 Rear Panel
10 Remote Control
10 Tour of the Remote Control
CONNECTIONS
12 Connecting to a TV
14 Connecting to an Audio Device
14 Method 1 Connecting to an HDMI (HDR)
compatible Soundbar / AV receiver that
supports pass through
15 Method 2 Connecting to a Soundbar /
AV receiver with a Digital Optical Cable
15 Connecting to a Network
15 Wired Network
SETTINGS
16 The Initial Settings Procedure
16 The Home Screen
17 Accessing the Settings Screen
17 Buttons on the Remote Control Used for
the Settings Menu
18 Settings Menu Functions
18 Picture
18 Sound
19 General
21 Support
21 Networks and the Internet
21 Configuring Your Network Connection
22 Upgrading Software
23 Update Now
23 Auto Update
7 English
Contents
MEDIA PLAY
24 Playing Commercial Discs
24 Disc Storage & Management
24 Playing Photos, Videos, and Music
(Multimedia)
24 Playing Media Content Saved on a USB
Device
25 Playing Media Content Saved in a
Computer
25 Playing a Disc with User Recorded Content
26 Controlling Video Playback
26 Buttons on the Remote Control used for
Video Playback
27 Using the On-screen Menu during
Playback of a Video
29 Using the Sort By & Options Menus
29 Controlling Music Playback
29 Buttons on the Remote Control used for
Music Playback
30 Using the Options Menu During Playback
30 Using the Sort By & Options Menus on a
File Screen
30 Repeating Tracks on an Audio CD
30 Shuffling Tracks on an Audio CD
30 Creating a Playlist from an Audio CD
31 Playing Photo Contents
31 Using the On-screen Menu during
Playback of a Photo File
32 Using the Sort By & Options Menus
NETWORK SERVICES
33 Creating a Samsung Account
34 Before Using Apps
34 Using Apps
34 The APPS Screen at a Glance
35 Starting an Application
36 Using the Internet
37 The Web Browser window at a Glance
39 Using the Browser Menu
40 Linking Your Internet Service Accounts to
the Product
40 BD-LIVE™
APPENDIX
41 Additional Information
41 Notes
43 Resolution according to the contents type
44 Digital Output Selection
45 Troubleshooting
48 Disc and Format Compatibility
48 Disc types and contents your product can
play
48 Disc types your product cannot play
49 Region Code
49 Logos of Discs the product can play
50 Supported Formats
54 Compliance and Compatibility Notice
55 Copy Protection
55 Network Service Disclaimer
56 Licenses
57 Specifications
8 English
Getting Started
Accessories
Check for the supplied accessories shown below.
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
Batteries (AA Size)
Power Cable
User Manual Remote Control
9 English
02 Getting Started
Front Panel
POWER
POWER
REMOTE CONTROL
SENSOR
USB HOSTDISC TRAY
OPEN/CLOSE BUTTON
POWER INDICATOR
Red: Power off
Green: Power on
Green blinking: Remote control or Front Key
input, Software update.
STOP BUTTON
PLAY/PAUSE
BUTTON
POWER BUTTON
| NOTES |
\
To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\
When the product displays an Ultra HD Blu-ray or standard Blu-ray Disc's menu, you cannot start the
movie by pressing the
p
button on the remote control or player. To play the movie, you must select
Play Movie or Start in the disc's menu, and then press the (OK) button on the remote control.
Rear Panel
POWER
MAIN
HDMI OUT
LAN
OPTICAL
DIGITAL
AUDIO OUT
POWER
MAIN
HDMI OUT
LAN
OPTICAL
DIGITAL
AUDIO OUT
HDMI OUTLANPOWER DIGITAL AUDIO OUT
| NOTE |
\
To use the Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI terminal.
10 English
Getting Started
Remote Control
| NOTE |
\
Previous BD-Player remote controls may not be compatible with this player.
Tour of the Remote Control
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
Turns the player on and off.
Turns the TV on and off.
Press to open and close the disc tray.
Return to the previous menu.
Use to display the number, color, or
information keypad on the screen.
The color buttons are used both for menus
on the player and also several Ultra HD
Blu-ray Disc or Blu-ray Disc functions.
(OK) : Use to select menu items.
(Up/Down/Left/Right) :
Move the cursor up, down, left, or right.
Display the home screen.
Press to use the Tools menu.
Use to enter the Popup menu.
Use to enter the disc menu.
TV volume adjustment.
After setup, allows you to set the input
source on your TV.
Press to play disc or files.
or
Press to pause playing.
Press to stop a disc or file.
Press to skip chapters.
Press to search backwards or forwards.
Inserting Batteries (AA Battery x2)
Slide the battery cover in the direction of the arrow until it is completely removed.
Insert 2 AA batteries (1.5V) in the correct +/- polarity configuration. Slide the battery cover back into
position.
11 English
02 Getting Started
Using Remote Control Buttons to Enter
TV Codes
1. Press and hold the
(TV Power) button.
2. While holding the
(TV Power) button,
press the buttons on the
remote that correspond to
a two-digit TV Code from
the list below. Use the
illustration to the right as a
guide.
For example: To enter 01, press the TOOLS
button and then press the 123 button. Note
that some TV brands have more than one
2-digit code. If the first code does not work,
try the next.
TV Control Codes
Brand Codes
SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09
AIWA 82
ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18
BANG & OLUFSEN
57
BLAUPUNKT 71
BRANDT 73
BRIONVEGA 57
CGE 52
CONTINENTAL
EDISON
75
DAEWOO
19, 20, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34
EMERSON 64
FERGUSON 73
FINLUX 06, 49, 57
FORMENTI 57
FUJITSU 84
GRADIENTE 70
GRUNDIG 49, 52, 71
HITACHI 60, 72, 73, 75
IMPERIAL 52
JVC 61, 79
LG
06, 19, 20, 21, 22, 78
Brand Codes
LOEWE 06, 69
LOEWE OPTA
06, 57
MAGNAVOX
40
METZ 57
MITSUBISHI
06, 48, 62, 65
MIVAR 52, 77
NEC
83
NEWSAN 68
NOBLEX 66
NOKIA 74
NORDMENDE
72, 73, 75
PANASONIC 13, 53, 54, 74, 75
PHILIPS 06, 56, 57
PHONOLA 72, 73, 75
PIONEER 58, 59, 73, 74
RADIOLA 06, 56
RADIOMARELLI 57
RCA 45, 46
REX 74
SABA 57, 72, 73, 74, 75
SALORA 74
SANYO 41, 42, 43, 44, 48
SCHNEIDER 06
SELECO 74
SHARP 36, 37, 38, 39, 48
SIEMENS 71
SINGER 57
SINUDYNE 57
SONY 35, 48
TELEAVA 73
TELEFUNKEN
67, 73, 75, 76
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
TOSHIBA
47, 48, 49, 50, 51, 52
WEGA 57
YOKO 06
ZENITH 63
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
1
8
3
0
2
9
5
7
4
6
12 English
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
POWER
LAN HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN
HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
Audio
Video
| NOTES |
\
Optimum picture quality is automatically obtained (HDMI UHD Color - On) when the player is
connected to a Samsung UHD TV.
\
To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI terminal.
\
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
DIGITAL AUDIO OUT on the product to an audio system to hear audio.
\
An HDMI to HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
\
When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for
the first time, the product automatically sets the HDMI output resolution to the highest supported by
the TV.
\
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
\
To view video in the HDMI 720p, 1080p, or 2160p output mode, you must use a high speed (category
2) HDMI cable.
Connections
13 English
03 Connections
\
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
\
If your TV does not support HDCP (High-bandwidth Digital Content Protection) version 2.2, some Ultra
HD Blu-ray titles may play at the 1080p resolution.
- This action is regulated by the Ultra HD Blu-ray Disc content's copyright protection standard
according to the producer's intention to avoid infringing the copyright.
- To view video from a Ultra HD Blu-ray Disc at its original resolution, connect the HDMI cable to an
HDMI input port on the TV that supports HDCP 2.2.
- To check whether the TV supports HDCP 2.2, check the HDMI port on the back of the TV or refer
to the TV user's manual.
\
This product supports the HDR function. (HDR: High Dynamic Range is a technique used to reproduce
a greater dynamic range of luminosity than is possible with conventional imaging devices.)
- To take advantage of the HDR function, you need HDR content, a TV supporting HDR, and a high-
speed HDMI cable.
- Connect the player to an HDMI input terminal on the TV that supports the HDR function using the
high speed HDMI cable.
- Use the TV's menu to activate the HDR related function. For further information, refer to the TV's
user manual.
14 English
Connections
Connecting to an Audio Device
You can connect this product to an audio system using the methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI (HDR) compatible Soundbar / AV receiver that supports
pass through
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver
to the HDMI IN jack of your TV.
- Your receiver must have 4K pass through capability to pass through UHD video content.
POWER
LAN HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
POWER
LAN
HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
Audio/Video
Video
Soundbar / AV receiver
| NOTES |
\
You must set up HDMI UHD Color to enable HDR on your Samsung TV manually if your player is not
directly connected to the TV. (For example, through a Soundbar or AV receiver.)
\
If AACS 2.0 was applied to the contents that you want to play, the contents may not be displayed on the
screen depending on the AV receiver connected. For more detailed information, refer to the user manual
of your AV receiver.
15 English
03 Connections
Method 2 Connecting to a Soundbar /
AV receiver with a Digital Optical Cable
• Using a digital Optical cable (not supplied),
connect the DIGITAL AUDIO OUT jack on the
product to the DIGITAL AUDIO IN jack of the
receiver.
• You will hear sound only through the front two
speakers with Digital Output set to PCM.
POWER
LAN HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
LAN
HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
Audio
Soundbar / AV receiver
| NOTE |
\
If you connect a receiver to the player's
DIGITAL AUDIO OUT port, the receiver’s audio
reproduction may not synchronize with that of
the TV.
Connecting to a Network
You can connect your product to your network.
Only a wired connection is supported.
Wired Network
POWER
LAN HDMI OUT
MAIN
( )
OPTICAL
DIGITAL
AUDIO OUT
LAN
Router or wall connection
| NOTES |
\
Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
\
DSL users, please use a router to make a
network connection.
\
Use Cat 7 (*STP Type) cable for the connection.
(* Shielded Twisted Pair)
16 English
Settings
The Initial Settings Procedure
• The Home screen will not appear if you do
not configure the initial settings.
• The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
• The access steps may differ depending on
the menu you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration,
and connect the player to the Internet. Follow the
directions on the screen.
| NOTES |
\
If you skip Network Setup during the Initial
Settings procedure, you can configure your
network settings later. See "Configuring Your
Network Connection" on pages 21~22 for
instructions.
\
If you want to display the Initial Settings screen
again and make changes, select Settings >
General > Start Setup in the Home screen or
select Settings > Support > Reset. (See page
21)
\
If you want to use the Anynet+ (HDMI-CEC)
function, please follow the instructions below.
1) Connect the product to an Anynet+ (HDMI-
CEC)-compliant Samsung TV using an HDMI
Cable.
2) Set the Anynet+ (HDMI-CEC) feature to On
in both the TV and the product.
3) Set the player to the Initial Settings
Procedure.
The Home Screen
Internet InternetApp1 App2 App3
1 2 3 4 5
Disc
1
(Functions)
• Settings : Opens the product’s
menu. In the menu, you can set
various functions to suit your personal
preferences. When you move focus
to the Settings menu, the Quick
Settings menu appears. Use the menu
to customize various options, such as
Picture Mode, Fit Screen Size, Sound
Output, Audio Output Format, and
Network.
• Source : Select an inserted disc or
USB storage device, or a connected
network device.
• Search : Lets you search for content
in Apps and YouTube by entering
corresponding search words.
• APPS : Access various for pay or
free-of-charge applications.
2
Disc : Displays the selected source.
3
Downloaded Apps : Displays downloaded
apps. Apps displayed here can be deleted,
edited, or rearranged, if necessary.
4
You can access the Internet.
5
Use the Add to Home option to add
frequently used menu items to the bottom
of the Home screen.
17 English
04 Settings
| NOTE |
\
If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 15 minutes,
the power will automatically turn off.
Accessing the Settings Screen
1. Select Settings on the Home screen, and
then press (OK) button. The Settings
screen appears.
Picture
TV Aspect Ratio 16:9 Original
Resolution Auto
Movie Frame (24p)
Fit Screen Size Size 4 (100%)
HDMI Color Format Auto
HDMI Deep Color Off
HDR to SDR Middle Gamma
Picture
Sound
General
Support
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration in the next
column.
Buttons on the Remote Control Used
for the Settings Menu
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
3
4
2
1
1
(OK) button : Press to activate the
currently selected item or confirm a
setting.
2
(Up/Down/Left/Right) buttons : Press
to move the cursor or select an item.
3
(Return) button : Press to return to the
previous menu.
4
(Home) button : Press to move to the
Home screen.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the Up/Down/Left/Right buttons
to select the function, menu item, or option.
The explanation will usually appear on the right
side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
18 English
Settings
Settings Menu Functions
Picture
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
Resolution
Set the output resolution of the HDMI video signal
to Auto, 2160p, 1080p, 720p, or 480p.
The number indicates the number of lines of video
per frame. Generally, the more lines, the higher the
quality.
Movie Frame (24p)
If the product is connected to a 24p compatible
TV, setting the Movie Frame (24p) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality.
•
You can enjoy the Movie Frame (24p) feature
only on a TV supporting this frame rate.
•
The Movie Frame (24p) feature becomes
active only if the player is playing 24 frame rate
contents.
•
Movie Frame is only available when the
product is in the HDMI 1080p or 2160p output
resolution modes.
Fit Screen Size
Set the screen to the optimal size.
HDMI Color Format
Lets you set the color space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
HDMI Deep Color
Lets you set the product to output HDMI video
with Deep Color. Deep Color provides more
accurate color reproduction with greater color
depth.
HDR to SDR
Lets you set the gamma level when watching
video converted from HDR to SDR.
Sound
Sound Output
Lets you select which speakers are active.
Select an audio device from the list.
Audio Output Format
Lets you select the digital audio output format
(HDMI) that is suitable for your AV Receiver.
| NOTE |
\
If the player is connected to an ATMOS
Soundbar with Auto on, the sound option
automatically switches to Bitstream.
Audio Output Format (Optical)
Lets you select the digital audio output format
(Optical) that is suitable for your AV Receiver.
PCM Downsampling
Lets you choose to have 96kHz PCM signals
downsampled to 48kHz before they are outputted
to an amplifier. Turn on PCM Downsampling if
the amplifier or receiver is not compatible with
96kHZ signal.
19 English
04 Settings
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system.
You can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases, when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
•
You can set the audio delay time between 0 ms
and 240 ms. Adjust it to the optimal setting.
| NOTES |
\
The audio delay time you specify may not be
exact depending on the content played.
\
This function can be used when playing
Optical Disc format contents.
General
Network
Network Status : Lets you check the current
network and Internet status.
Network Settings : Configure the network
connection so you can enjoy various features
such as Internet services, and perform Software
Updates.
BD-Live Settings :
Set various BD-Live
functions. BD-Live allows you to access extra
features available on some Ultra HD Blu-ray
Discs or Blu-ray Discs if you are connected to
the Internet.
•
BD-Live Internet Connection : Lets you
fully allow, partly allow, or prohibit a BD-Live
Internet connection.
•
BD Data Management : Manage BD data
downloaded from a BD-Live service or
Ultra HD Blu-ray Disc/Blu-ray Disc.
| NOTE |
\
To use the BD-Live Settings function,
connect a USB storage device first, and then
select it from the BD Data Management
menu.
System Manager
You can change the options listed below to match
your preferences.
Language : You can select the language you
prefer for the Onscreen menu, disc menu,
audio, subtitles, etc.
•
The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Device Name : Lets you input a name for the
product that will identify it on your network.
View Notifications : You can view the list of
event messages generated by the player.
20 English
Settings
Samsung Account : Create and manage your
own Samsung account. To create a Samsung
account select : Settings > General > System
Manager > Samsung Account > Create
Account. Some of the Smart Hub services are
paid services.
Security : The default security PIN is 0000.
Enter the default PIN to access the security
function if you haven't created your own PIN.
After you have accessed the security function
for the first time, change the PIN using the
Change PIN function.
•
BD Parental Rating : Prevents playback of
Ultra HD Blu-ray Discs or Blu-ray Discs with a
rating equal to or above a specific age rating
you have set unless you enter the PIN.
•
DVD Parental Rating : Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.
•
Change PIN : Change the 4-digit PIN used to
access security functions.
`
If you forget your PIN:
1. Remove any disc or USB storage
device.
2. Press and hold the
^
(Open/Close)
button on the top panel for 5 seconds
or more. The initialization message
appears on the screen, and the power
will turn off automatically.
When you turn your product on again,
all the settings will be reset.
WoL : Turn on or turn off the WOL (Wake on
LAN) function.
External Device Manager
Anynet+ (HDMI-CEC) : Anynet+ is a convenient
function that offers linked operations with other
Samsung products that have the Anynet+
feature and lets you control those products
with one Samsung TV remote. To operate this
function, you must connect this product to an
Anynet+ Samsung TV using an HDMI cable.
Keyboard Manager : Set the language and
type for a keyboard connected via USB.
| NOTES |
\
You can use the keyboard only when a
QWERTY keyboard screen or window
appears in the Web Browser.
\
Some USB HID keyboards and mice may
not be compatible with this
player
.
\
Some HID keyboard keys may not work.
\
Wired USB keyboards are not supported.
\
Some applications may not be supported.
\
If a wireless HID Keyboard does not operate
because of interference, move the keyboard
closer to the
player
.
Accessibility
High Contrast : Set up the background and
font in high contrast color in Apps (Smart Hub)
and Multimedia.
Enlarge : Set whether to enlarge the highlighted
item in Apps (Smart Hub) and Multimedia.
Start Setup
Lets you re-run the Initial Settings procedure.
21 English
04 Settings
Support
Software Update
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
The default security PIN is 0000.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
Remote Management
When activated, lets Samsung Call Center
agents diagnose and fix problems with this player
remotely. Requires an active Internet connection.
| NOTES |
\
Remote Management service might not be
available in some countries.
\
To use Remote Management:
1) Call the Samsung Contact Center and ask
for remote support.
2) Open the player's menu on your TV and
go to the Support section.
3) Select Remote Management, and then
read and agree to the service agreements.
When the PIN screen appears, provide the
PIN number to the agent.
4) The agent accesses this player.
About This Device
Provides contact information for assistance with
your product.
Terms & Policy
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the product's software through
the network connection. For more information
about accessing and using Internet services, see
the Network Services chapter of this manual on
pages 33~40. Instructions for configuring the
network connection start below.
Configuring Your Network Connection
Before you begin, determine if your IP address
is static or dynamic. (Most are dynamic.) If it is
dynamic, and you have a wired network, we
recommend using the Automatic configuration
procedures described below.
You must connect the product to your router using
a LAN cable before you start the configuration
procedure.
| NOTE |
\
Use Quick Settings > Network on the Home
screen to simplify the network configuration
process.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ
Wired - Automatic
1. In the Home screen, select Settings, and
then press the (OK) button.
2. Select General, and then press the (OK)
button.
3. Select Network, and then press the (OK)
button.
4. Select Network Settings, and then press the
(OK) button.
5. Select Wired in the Network Type screen,
and then press the (OK) button.
22 English
Settings
6. The product detects the wired connection,
verifies the network connection, and then
connects to the network.
7. Press the (OK) button.
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 through 3 in Wired - Automatic,
and then follow these steps:
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the (OK) button.
The IP Settings screen appears.
3. Select the IP Settings field, and then press
the (OK) button.
4. Select Enter manually in the IP Settings
field, and then press the (OK) button.
5. Select a parameter to enter (IP Address, for
example), and then press the (OK) button.
Use the Up/Down buttons on the remote
control to enter the numbers for the
parameter.
Use the Left/Right buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one
parameter, press the (OK) button.
6. Press the Up or Down button to move
to another parameter, and then enter the
numbers for that parameter following the
instructions in Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all parameters.
| NOTE |
\
You can get the Network parameters from your
Internet provider.
8. When finished entering all the parameters,
select OK, and then press the (OK) button.
The product verifies the network connection
and then connects to the network.
Upgrading Software
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
• Never turn the product off or back on
manually during the update process.
1. In the Home screen, select Settings, and
then press the (OK) button.
2. Select Support, and then press the (OK)
button.
3. Select Software Update, and then press the
(OK) button.
4. To download update software and update
now, select Update Now, and then press the
(OK) button.
5. To let the product download update software
automatically when available, select Auto
Update, and then press the (OK) button.
See "Auto Update" in the next column for
details.
| NOTES |
\
The upgrade is complete when the product
turns off, and then turns on again by itself.
\
Samsung Electronics takes no legal
responsibility for any product malfunction
caused by an unstable Internet connection
or consumer negligence during a Software
Update.
\
If you want to cancel the upgrade while the
upgrade software is downloading, press the
(OK) button.
\
This option requires an Internet connection.
23 English
04 Settings
Update Now
1. Select Support > Software Update >
Update Now.
2. An online update function downloads and
installs the update software directly from the
Internet.
- This option requires an Internet connection.
| NOTES |
\
When the system update is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\
Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the
product downloads new upgrade software when it
is in Auto Update mode.
This allows the product to download upgrade
software automatically, when you are not using it.
1. Press the Up/Down buttons to select Auto
Update, and then press the (OK) button.
2. The function turns on or off each time the
(OK) button is pressed.
| NOTE |
\
To use the Auto Update function, your product
must be connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1. Visit Samsung's website on a computer and
download the update package to a USB
device.
2. Save the update package in the USB device's
top-level folder.
- Otherwise, the product will not be able to
locate the update package.
3. Connect the USB device with the update
package to the product.
4. Select Support > Software Update >
Update Now.
5. The software is updated using the update
package on the USB device.
| NOTES |
\
There should be no disc in the product when
you upgrade the software using the USB jack.
\
When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
\
Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
\
Software Updates using the USB jack must be
performed with a USB flash memory stick only.
24 English
Media Play
Your Ultra HD Blu-ray Player can play content
located on Ultra HD Blu-ray/Blu-ray/DVD/CD
discs, USB devices, PCs, and on the Web.
To play content located on your PC, you must
connect the PC and the product to your network.
Playing Commercial Discs
1. Press the
^
button to open the disc tray.
2. Place a disc gently into the disc tray with the
disc’s label facing up.
3. Press the
^
button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the (Home) button, select Play Disc of the
Home screen, and then press the
(OK) button on the remote.
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound
and picture quality or cause
skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
`
Do not keep in direct sunlight.
`
Keep in a cool ventilated area.
`
Keep in a clean protective jacket and store
vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, or computer on the product.
| NOTES |
\
You cannot play media content if the content
or the storage device is not supported by the
product.
\
Backup important files before connecting a
USB device. Samsung is not responsible for
damaged or lost files.
Playing Media Content Saved on a USB
Device
1. Connect your USB device to the product.
2. Press the (Home) button.
Select (Source), and then USB Storage.
The folders and files in the USB device are
listed.
3. Select the media content you want to play
from the list. The media content plays.
4. To exit, press the
@
(Stop) button or
(Return) button.
| NOTE |
\
When connected to a USB device, the screen
displays a message at the top. To view content
files on the USB device, select Browse.
25 English
05 Media Play
Playing Media Content Saved in a
Computer
You can play media content on the product that
is stored on a computer connected to the same
network as the product.
| NOTES |
\
To play content on a computer, make sure
that home network mode is enabled on the
computer.
\
The content shared by a computer may not
play depending on the encoding type and
file format of the content. In addition, some
functions may not be available.
\
The media content may not play smoothly
depending on the network status. If the content
does not play smoothly, transfer the content to
a USB device, connect the USB device to the
player, and then play the content from the USB
device.
1. Connect your PC and the player to the same
network.
2. Press the (Home) button.
Select (Source), and then User's PC.
The folders and files in your PC are listed.
3. Select the media content you want to play
from the list. The media content plays.
4. To exit, press the
@
(Stop) button or
(Return) button.
| NOTE |
\
Playing UHD BD content may require a
network connection. Depending on the
network environment and the status of the
Contents Server (Studio), playback may not be
successful.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc tray
with the disc’s label facing up, and then close
the tray.
2. Press the (Home) button.
Select (Source), and then Disc.
The folders and files in the disc are listed.
| NOTE |
\
Even though the product will display folders
for all content types, it will only display files of
the Content Type you selected in the Filter By
menu.
For example, if you selected Music, you will
only be able to see music files. You can change
this selection by returning to the Filter By
menu.
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4. If necessary, use the Up/Down/Left/Right
buttons to select a folder, and then press the
(OK) button.
5. Use the Up/Down/Left/Right buttons to
select a file to view or play, and then press the
(OK) button.
6. Press the (Return) button one or more
times to exit a current screen, exit a folder, or
to return to the Home screen.
7. Go to pages 26~32 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
26 English
Media Play
Controlling Video Playback
You can control the playback of video content located on a Disc, USB, or PC. Depending on the disc or
contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
To use the disc menu, popup menu, or
title list
DISC
MENU
button
During playback, press this button
to display the Disc menu.
POP UP
/MENU
button
During playback, press this button
to display the Popup menu.
Playback related buttons
The product does not play sound in Search, or
Step mode.
• To return to normal speed playback, press the
p
button.
p
button
Starts playback. When a disc is
playing, push to pause playback.
Push again to restart.
@
button
Stops playback.
Fast
Motion Play
During playback, press the
(
or
)
button.
Each time you press the
(
or
)
button, the playback speed
will change.
Slow
Motion Play
In pause mode, press the
)
button.
Each time you press the
)
button, the playback speed will
change.
Skip
Motion Play
During playback, press the
I
_
or
+
I
button.
Each time you press the
I
_
or
+
I
button, the disc moves to the
previous or next chapter or file.
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
27 English
05 Media Play
Using the On-screen Menu during Playback of a Video
Use the Up/Down/Left/Right buttons to select each function and then press the (OK) button.
Displaying optional menus
When playing a disc: Press TOOLS on the remote control.
When playing a video file: Press (OK) on the remote control, and then select on the screen.
| NOTE |
\
Available optional menus differ by disc or file format. Refer to the table below.
Optional
Menu
Description
Menu Availability
Disc File
Information
Lets you view a video's information.
Play from the
Beginning
Select to return to the beginning of the movie, and then press
the (OK) button.
Select Scene
- Search Titles : If there is more than one movie on the disc or
device, select to start a different title.
1. Select Search Titles, and then press the
(OK) button.
2. Use the Up/Down buttons to select a title, and then press
the (OK) button.
- Search Chapters : Select to play the chapter of your choice.
1. Select Search Chapters, and then press the
(OK) button.
2. Use the Up/Down buttons to select a chapter, and then
press the (OK) button.
- Search Time Bar : Select to play the movie from
a selected time point.
1. Select Search Time Bar, and then press the
(OK) button.
2. Using the Left/Right buttons, enter the time point you want
to go to.
28 English
Media Play
Optional
Menu
Description
Menu Availability
Disc File
Select Scene
| NOTES |
\
You can also use the Left/Right buttons to advance or
rewind the movie. The movie advances or rewinds one
minute each time you press the Left/Right buttons.
\
If the index information in the file is damaged or the file does
not support indexing, you will not be able to use the Select
Scene function.
\
If you play files on a network device after you have connected
the player to a computer on your network, Select Scene
may not work.
\
During playback of a video file, use the Up button on the
remote control to jump to specific scenes.
Repeat Mode
Lets you repeat a title, chapter, or specific section.
Picture Mode
Lets you set the picture mode.
- Dynamic : Increases sharpness and brightness.
- Standard : Choose this setting for most viewing applications.
- Movie : The best setting for watching movies.
- User : Lets you adjust the sharpness and noise reduction
function respectively.
Audio
Use to set the desired audio language.
Audio Sync
Select to adjust the audio sync.
Subtitle
Use to set the desired subtitle language.
Angle
Lets you view a scene from another angle. The Angle option
displays the number of angles available to view. When an Ultra
HD Blu-ray Disc/Blu-ray Disc/DVD contains multiple angles of a
particular scene, you can change to another angle.
Rotate
You can rotate the screen clockwise or counterclockwise by 90
degrees.
| NOTE |
\
Video files with high bitrates of 20Mbps or more strain the product's capabilities and may stop playing
during playback.
29 English
05 Media Play
Using the Sort By & Options Menus
Using the Sort By Menu
On a file screen containing video files, select
Sort
By
,
and then press the (OK) button. Arrange
folders or files in order by Date or Title.
Using the Options Menu
On a file screen containing video files, select
Options
,
and then press the (OK) button.
Play Selected
Lets you select specific files
to play. It works essentially the
same for all media.
Refresh
Refreshes the files and folders
list from the media or storage
device.
Controlling Music Playback
You can control the playback of music content
located on a Disc, USB, or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Buttons on the Remote Control used
for Music Playback
POP UP
/MENU
DISC
MENU
TOOLS
123
TV
2
3
4
1
1
@
button : Stops a track.
2
p
button : Plays/Pauses a track.
3
Fast Play (Audio CD [CD-DA] only)
During playback, press the
(
or
)
button.
Each time you press the
(
or
)
button,
the playback speed will change.
4
I
_
+
I
buttons : Move to the previous/next
track.
30 English
Media Play
Using the Options Menu During
Playback
On the music file playback screen, use the
Up/
Down/Left/Right
buttons to select the and then
press the
(OK)
button.
Play Selected
Lets you create a playlist by
selecting specific tracks to play.
It works essentially the same
way for all media. See "Creating
a Playlist from an Audio CD" on
page 30.
Information
Select to see the Contents
information.
| NOTE |
\
Depending on the disc or storage device, the
menu may differ.
Using the Sort By & Options Menus on
a File Screen
Using the Sort By Menu
On a file screen containing music files, select Sort
By, and then press the (OK) button. Arrange
folders or files in order by Date or Title.
Using the Options Menu
On a file screen containing music files, select
Options
,
and then press the
(OK)
button.
Play Selected
Lets you select specific files
to play. It works essentially the
same for all media. See the
"Repeating Tracks on an Audio
CD" on page 30.
Refresh
Refreshes the files and folders
list from the media or storage
device.
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1. On the Playback screen, use the Up/Down/
Left/Right buttons to select in the lower
left corner of the screen, and then press the
(OK) button.
2. Use the Up/Down buttons to select the
repeat mode you want - Off, One Song, or
All - and then press the (OK) button.
TRACK 001
XXXXXX
00:55 03:35
TRACK 001 XXXXXX
TRACK 002 XXXXXX
TRACK 003 XXXXXX
TRACK 004 XXXXXX
TRACK 005 XXXXXX
TRACK 006 XXXXXX
TRACK 007 XXXXXX
TRACK 008 XXXXXX
TRACK 009 XXXXXX
TRACK 010 XXXXXX
TRACK 011 XXXXXX
TRACK 012 XXXXXX
Pause
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1. On the Playback screen, use the Up/Down/
Left/Right buttons to select in the lower
left corner of the screen, and then press the
(OK) button.
2. Use the Up/Down buttons to set the Shuffle
mode On or Off, and then press the (OK)
button.
Creating a Playlist from an Audio CD
1. With the Playback screen displayed, select
the and then press the (OK) button. The
Settings menu appears.
2. Use the Up/Down buttons to select Play
Selected, and then press the (OK) button.
3. Use the Up/Down buttons to select a track,
and then press the (OK) button. A check
appears to the left of the track.
31 English
05 Media Play
4. Repeat Step 3 to select and check additional
tracks.
5. To remove a track from the list, move to the
track, and then press the (OK) button
again.
The check on the track is removed.
6. When done, press the Up/Down buttons
to select Done, and then press the (OK)
button. The Music Playback screen reappears
listing only the tracks you checked. The
selected tracks play automatically.
| NOTES |
\
You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
\
On the Selection Play screen, you can also
choose Select All, Deselect All, and Cancel.
- Use Select All to select all tracks. This
cancels your individual track selections.
When you press the (Return) button
on your remote control or select the Done
button, and then press the (OK) button,
all tracks will appear on the Music Playback
screen, and the product will begin to play all
tracks from Track 001.
- Use Deselect All to deselect all selected
tracks at once. Then, select individual tracks
or use Select All to select all the tracks, and
then press the (Return) button on your
remote control. If you do not use Select All
or select individual tracks, the Playlist will not
change.
- Cancel cancels any changes you made on
the Play Select screen. When you return
to the Playback screen, the Playlist will be
unchanged.
Playing Photo Contents
You can play photo contents located on a DVD,
USB, or PC.
Using the On-screen Menu during
Playback of a Photo File
Use the Up/Down/Left/Right buttons to select
each function and then press the (OK) button.
To display the Options menu during playback
or in pause mode, press the TOOLS button.
Alternatively, use the Up/Down/Left/Right
buttons to select and then press the (OK)
button.
Screen Fit
Resizes photos to fit the
screen.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate Left
This will rotate the picture
counterclockwise.
Rotate Right
This will rotate the picture
clockwise.
Slideshow
Speed
Select to set the slide show
speed.
Slideshow
Effect
Select to set the slide show
effect.
Background
Music
Select to listen to music while
viewing a slide show.
| NOTE |
\
The number of music files
available from external
devices will differ depending
on the device.
Information
Select to see the Contents
information.
| NOTES |
\
Depending on the disc or storage device, the
menu may differ.
32 English
Media Play
\
To enable the Background Music function, the
photo file must be on the same storage media as
the music file.
Note that the sound quality can be affected by the
bitrate of the MP3 file, the size of the photo, and
the encoding method.
Using the Sort By & Options Menus
Using the Sort By Menu
On a file screen containing photo files, select Sort
By, and then press the (OK) button. Arrange
folders or files in order by Date or Title.
Using the Options Menu
On a file screen containing photo files, select
Options, and then press the (OK) button.
Play Selected
Lets you select specific files
to play. It works essentially
the same for all media. See
"Creating a Playlist from an
Audio CD" on page 30.
Refresh
Refreshes the files and folders
list from the media or storage
device.
33 English
06 Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting the
product to your network.
To use network services, you must first:
1. Connect the player to a network.
(See page 15)
2. Configure the network settings.
(See pages 21~22)
Creating a Samsung Account
Create a Samsung account so you can take
advantage of all Samsung has to offer on line.
Set up accounts for each household member so
each member can access their own accounts on
Facebook, Twitter, etc. You also need a Samsung
account if you want to download for-pay apps and
rent movies.
| NOTE |
\
The terms of agreement screen appears if you
skipped Smart Hub terms of agreement at the
initial settings stage. Agree to all the terms and
then follow the steps shown below.
1. On the Home screen, press the (APPS)
button. The Samsung Account screen
appears.
2. On the Samsung Account screen, select
Create Account, and then press the (OK)
button.
3. Only users over 14 years can create a
Samsung account. When a window asking if
you are eligible appears, select Yes, and then
press the (OK) button.
The Samsung account Terms & Conditions,
Privacy Policy screen appears.
4. Press the (OK) button to agree, press the
Right button, and then press the (OK)
button.
The Create Account screen appears.
5. Select the ID field, and then press the (OK)
button. The keyboard pop-up appears.
6. Enter your e-mail address using the keyboard.
Use the arrow buttons to move from character
to character.
Press (OK) to select a character. Select the
on the left to enter capitals. Select the #@!
to enter additional symbols.
7. When finished, select the Next on the
keyboard, and then press the (OK) button.
When a window confirming that the ID is
valid appears, press the (OK) button. The
Create Account screen reappears. Enter
the password, use the directional keys on
the remote control to select Done, and then
press the (OK) button.
8. Press the (OK) button again to display the
next page.
9. Enter your first name, and last name in the
same fashion.
10. Select the Date of Birth field, and then select
numbers using the up and down arrow
buttons or by pressing numbers on your
remote. After filling in the required input fields,
select Next and press the (OK) button.
When creation of your Samsung account is
complete, you are automatically logged in via
the new account.
| NOTES |
\
Samsung sends a confirming e-mail to the
address you entered. You must open the e-mail
and respond as requested to finalize your
account.
\
To manage your Samsung account, use the
Samsung Account > My Account menu
items.
Network Services
34 English
Network Services
Before Using Apps
If you haven’t set up Smart Hub, when you use
Apps for the first time, the product will ask you to
perform the Smart Hub set up procedure.
1. On the Home screen, select (APPS), and
then press the (OK) button.
2. If you haven't set up Smart Hub, the Smart
Hub Terms of Agreement and Privacy
Policy screen appears.
3. To view details before agreeing to the terms of
agreement, select View All and press the
(OK) button.
| NOTE |
\
You do not need to consent to the
Supplemental Privacy Notice, but one or more
Smart Hub features or functions may not be
available if you do not.
4. Select I agree to all, and then press the
(OK) button. The Setup Complete screen
appears. Press the (OK) button.
Using Apps
You can download applications from the Internet,
and access various applications and view them on
your TV. To access some applications, you need
to have a Samsung account.
| NOTE |
\
For some 4K streaming service Apps (Netflix,
Amazon, etc.), the use of the 4K service is
enabled if the TV supports HDCP 2.2. If the
TV (or the connected HDMI terminal) does not
support HDCP 2.2, the 4K category will not be
displayed.
The APPS Screen at a Glance
The APPS screen displays a list of a variety of
apps. Use the list to download apps with ease.
APPS
DISCOVER
YOUR FAVORITE
VIDEO APPS
1 2
3
1
Download a video app to play video.
2
Log in with your Samsung account.
Use a variety of Samsung-provided
functions. If you do not have a
Samsung account, create one here.
Enter the name of a specific app to
search for it.
Configure settings for a downloaded
app.
3
Available apps are displayed at the
bottom. Use the Up/Down/Left/Right
buttons to download or use a desired app.
The first time you open the APPS screen, the
Ultra HD Blu-ray Player automatically downloads
a group of free apps. Once these apps have been
downloaded, they appear on the Downloaded
App list.
35 English
06 Network Services
Downloading an App
1. Use the Up/Down buttons to move to
Editor's Choice, Most Popular, Group
Content, or Genre. If you have moved to
Group Content or Genre, press the (OK)
button to select the desired category or
genre.
2. Use the Up/Down/Left/Right buttons to
move to the app you want to download, and
then press the (OK) button.
The Detail
Information screen for the app appears.
| NOTE |
\
Apps already installed show "Installed" in the
app thumbnail.
3. Select Install on the screen, and then press
the (OK) button. Install changes to Cancel
and the app begins to download.
4. If you want to cancel the download, select
Cancel, and then press the (OK) button.
5. When the download is complete, Cancel
changes to Open. Select Open, and
then press the (OK) button to start the
application. Alternately, press the (Return)
button until the APPS screen reappears.
The app you downloaded will be displayed on
the Downloaded App list.
| NOTES |
\
To add the installed app to the bottom of the
Home screen, select Add to Home on the
installation complete screen.
\
If the App cannot be downloaded due to
insufficient remaining internal memory, connect
a USB storage device and try again.
Starting an Application
1. On the Home screen, select (APPS), and
then press the (OK) button.
2. On the APPS screen, use the Up/Down
buttons to move to Downloaded App. Use
the Left/Right buttons to move to the desired
app, and then press the (OK) button. The
app starts.
The Settings Menu
Use the Up/Down/Left/Right buttons to move to
Settings in the top right of the APPS screen,
and then press the (OK) button.
Auto Update
Turn on or turn off the automatic app update
option. Select Auto Update in the top right of
the Settings screen, and then press the (OK)
button. The option turns On or Off each time the
button is pressed.
Delete
1. On the Settings screen, select the app to
delete.
2. Select Delete, and then press the (OK)
button.
Add to Home
1. On the Settings screen, select the app to be
added to the Home screen.
2. Select Add to Home, and then press the
(OK) button.
3. At the bottom of the screen, use the Left/
Right buttons to specify the location of
the app to add, and then press the (OK)
button.
36 English
Network Services
Lock/Unlock
This function blocks access to an app unless you
enter your PIN. Unlock removes the lock.
1. On the Settings screen, select the app to be
locked.
2. Select Lock/Unlock, and then press the
(OK) button. Enter your PIN. A check
appears next to the app.
| NOTE |
\
To unlock apps, follow essentially the same
directions, but select apps that have locks.
Move
1. On the Settings screen, select the app to be
moved.
2. Select Move, and then press the (OK)
button.
3. Use the Left/Right buttons to move the app.
4. When the app is where you want it, press the
(OK).
Reinstall
1. On the Settings screen, select the app to be
reinstalled.
2. Select Reinstall, and then press the (OK)
button. The app is reinstalled. Reinstallation
may take a few minutes.
View Details
1. On the Settings screen, select the app you
want to view details for.
2. Select View Details, and then press the
(OK) button. The detailed information page
for the app appears.
Using the Internet
You can access the Internet using the Internet
application.
Select Internet on the Home screen, and then
press the (OK) button.
| NOTES |
\
The Web Browser is not compatible with Java
applications.
\
If you attempt to download a file, and the file
cannot be saved, an error message will appear.
\
E-commerce (purchasing products online) is
not supported.
\
ActiveX is not supported.
\
Access may be blocked to some websites or to
web browsers operated by certain businesses.
\
Playing Flash videos is not supported.
37 English
06 Network Services
The Web Browser window at a Glance
Featured
Featured
Most visited
Bookmarks Open Tabs
http://www.samsung.com
100%
1 32 6
5
4
1
• Current Tab: Shows the current screen
name. To delete the tab, click the next
to the tab name.
• Open new tab : Opens a new web
browser tab.
• Open New Secret Tab: Opens a new
browser tab in Security Mode.
2
• Featured: Shows recommended
websites.
• Most visited: Shows frequently visited
websites.
• Bookmarks: Shows a list of
bookmarks.
You can also select an
existing bookmark, and edit and delete
bookmarks.
• Open Tabs: Shows a list of your open
tabs and the tabs opened in another
web browser logged in using the same
account.
3
The Control Panel, which runs across the
top of the screen, has a series of icons
which start a number of useful functions.
• : Moves to the previous page.
• : Moves to the next web page.
• : Moves to the Home screen of the
Web Browser.
•
http://www.samsung.com
: Use
the on-screen keyboard pop-up to enter
a URL or keyword to search for specific
information.
See "Using the Keyboard
Pop-up" on the next page.
• : Reloads the current page so that it
is refreshed on the screen.
• : Adds the current page to your
bookmarks.
•
100%
: Lets you enlarge or shrink the
screen by various percentages.
4
• : Lets you configure the Browser’s
settings. See "Using the Browser Menu"
on page 39.
5
• : The Samsung Account page
appears.
6
• : Closes the Web Browser.
38 English
Network Services
Using the Keyboard Pop-up
When you click the , or access a
data or text entry field, and then press the (OK)
button, the keyboard pop-up appears.
To use the keyboard pop-up with your remote,
follow these steps:
Featured
Featured
Most visited
Bookmarks Open Tabs
http://www.samsung.com
100%
1 2 3 4 5 6 7 8 9 0 Delete All
#@! q w e r t y u i o p ^ *
a s d f g h j k l ~ @ !
Done
ENG
z x c v b n m , . ?
-
www. .com
/ < > Cancel
| NOTE |
\
Characters that can be displayed using the
keyboard depend on the selected language.
1. Use the Up/Down/Left/Right buttons on
your remote to move the highlight to a letter
or number of your choice.
2. Press the (OK) button to enter the letter or
number into the entry field.
3. To access capital letters, move the highlight
to the key on the top left, and then press
the (OK) button. Press the (OK) button
again with the key highlighted to access
lowercase letters again. When the on-screen
keyboard pops up, press the
p
button
on the remote control to switch between
uppercase and lowercase modes.
4. To access symbols and additional punctuation
marks, highlight the #@! on the left, and then
press the (OK) button.
5. To delete a character you entered, move the
highlight to the , and then press the (OK)
button.
6. To delete all the characters you entered, move
the highlight to Delete All, and then press the
(OK) button.
7. When finished entering, move the highlight to
Done, and then press the (OK) button.
Options on the Keyboard Pop-Up
To access the keyboard pop-up options, highlight
the on the bottom left of the keyboard, and
then press the (OK) button.
Reset Recommended Text Memory
Reset erases the Samsung Keyboard's memory.
Select Reset to erase everything that the
Samsung Keyboard has learned about your
writing style, including any new words you have
used.
Predict Next Character (when using direction
buttons)
The keyboard predicts the next letter as you
enter letters. The predictions appear in a ring
around the letter you have just entered. You
can select a predicted letter or move to another
letter. You can turn this function on or off.
Language
Select the language for the keyboard.
You can select English, French, Russian, etc.
39 English
06 Network Services
Using the Browser Menu
The menu contains functions that control how the
browser operates and browser security functions.
To open the menu, highlight the (Menu) icon,
and then press the (OK) button. To select an
option in the menu, highlight the option, and then
press the (OK) button.
Featured
Featured
Most visited
Bookmarks Open Tabs
http://www.samsung.com
100%
History
Desktop View
View Certificates
Settings
History
Displays a list of visited websites. To delete the
list, click Remove All.
Desktop View
You can turn on or turn off Desktop View.
View Certificates
Shows the certificate information of the current
Web Site.
Settings
• General
- Sync and View Tabs and Bookmarks
Across Devices: Log in with your Samsung
account to sync the main unit with other
devices. You can share bookmarks and
view tabs that are opened in the other
devices.
- Hide Tabs and Toolbar automatically:
Automatically hides the tabs and toolbar.
- Pop-up Blocker: Blocks pop-up windows.
- Reset Settings: You can reset all web
browser settings to their factory defaults.
Your Bookmarks and History won't be
affected.
• Home Page: You can set the Browser's home
page.
• Search Engine: You can set the desired
Search Engine.
• Privacy & Security
- Do Not Track: Deters websites from
tracking you.
- Delete History: Deletes your entire
browsing history.
- JavaScript: Allows all sites to run
JavaScript for a better browsing experience.
- Delete browsing data: Deletes all browsing
data such as cookies, cached images, and
data. Your Bookmarks and History won't be
affected.
• Parental Lock: Enable web access only to
pages that you have approved.
- Parental Lock PIN: Set a PIN for managing
the Parental lock. Click Set PIN to set the
PIN.
- List of Approved Pages: Lets you approve
specific pages or remove Approved pages.
• Encoding: You can set the encoding setting
for web pages to automatic or select the
encoding format manually from a list.
• About: Provides basic information about the
operation of the Web Browser.
| NOTE |
\
Depending on the web site, some of the
Settings functions may not be activated.
Functions that are not activated are greyed out
and cannot be used.
40 English
Network Services
Linking Your Internet Service
Accounts to the Product
The Link Service Accounts function lets you
link your product to your accounts with Internet
services such as Pandora so that the product can
log you in to the service automatically when you
start the app for that service.
Register your account by going to HOME
(APPS)
Sign in
Create with
Facebook.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
content available on BD-LIVE compliant discs.
1. Attach a USB flash memory drive to the USB
jack on the front of the product, and then
check its remaining memory. The memory
device must have at least 1GB of free space
to accommodate the BD-LIVE services.
2. Select Settings on the Home screen, and
then press the (OK) button.
3. Select General, and then press the (OK)
button.
4. Select Network, and then press the (OK)
button.
5. Select BD-Live Settings, and then press the
(OK) button.
6. Select BD Data Management, and then
press the (OK) button.
7. Select Select Device, and then press the
(OK) button.
8. Select USB Storage, and then press the
(OK) button.
9. Insert an Ultra HD Blu-ray Disc or Blu-ray Disc
that supports BD-LIVE.
10. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
| NOTE |
\
The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
41 English
07 Appendix
Additional Information
Notes
Settings
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of
your TV screen, the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on
the sides of the picture).
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just
loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats
(Dolby Digital, DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Ultra HD Blu-ray Discs and standard Blu-ray Discs do not have
BONUSVIEW audio and Navigation Sound Effects.
• The Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected
to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM
regardless of your Digital Output selections (PCM or Bitstream).
PCM Downsampling
• Even when PCM Downsampling is set to off, some discs will only output
downsampled audio through the optical digital output.
• HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby
Digital, DTS), the product may output PCM 2ch downmixed audio even
though you selected Bitstream (either Reencoded or Unprocessed) in the
setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the
product will output at 48kHz.
BD-Live Internet Connection
• What is a valid certificate?
When the product uses BD-LIVE to send the disc data and a request to the
server to certify the disc, the server uses the transmitted data to check if the
disc is valid and sends the certificate back to the product.
• The Internet connection may be restricted while you are using BD-LIVE
contents.
Appendix
42 English
Appendix
Settings
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect
the USB device in the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume
label) are supported.
We recommend you use USB devices that support the USB 2.0 protocol with
4 MB/sec or faster read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
conditions.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please
refer to the user manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+
function.
Media Play
Selecting the Audio Language
• The Left/Right indicator will not appear on the screen if the BONUSVIEW
section does not contain any BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the
languages that are encoded on the disc. This function or certain languages
may not be available.
• Some Ultra HD Blu-ray Discs and standard Blu-ray Discs may allow you to
select either the PCM or Dolby Digital audio soundtrack in English.
Selecting the Subtitle Language
• Depending on the Ultra HD Blu-ray Disc/Blu-ray Disc/DVD Disc, you may be
able to change the subtitle language in the Disc Menu. Press the DISC MENU
button.
• This function depends on the selection of subtitles that are encoded on the
disc and may not be available on all Ultra HD Blu-ray Discs/Blu-ray Discs/
DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the
Ultra HD Blu-ray Disc or Blu-ray Disc has a BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same
time.
• The total number of primary and secondary subtitles, respectively, is displayed.
43 English
07 Appendix
Resolution according to the contents type
Contents Type
Setup
Ultra HD
Blu-ray Disc/
Blu-ray Disc
E-contents/
Digital contents
DVD Disc
Movie
Frame(24p)
* 2160p, 1080p
only
Disc
Content
Auto
2160p(1080p)@24 2160p(1080p)@60 2160p(1080p)@60
Off
Max.Resolution of
TV input
Max.Resolution of
TV input
Max.Resolution of
TV input
Streaming
Content
Auto
2160p(1080p)@60 2160p(1080p)@24 2160p(1080p)@60
Off
Max.Resolution of
TV input
Max.Resolution of
TV input
Max.Resolution of
TV input
Resolution
Auto
Max.Resolution of
TV input
Max.Resolution of
TV input
Max.Resolution of
TV input
2160p 2160p@60 2160p@60 2160p@60
1080p 1080p@60 1080p@60 1080p@60
720p 720p@60 720p@60 720p@60
480p 480p@60 480p@60 480p@60
| NOTES |
\
If the TV you connected to the product does not support Movie Frame or the resolution you selected,
the message
"If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to
the previous resolution. Do you want to change the resolution?"
appears. If you select Yes, the TV's
screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution
automatically.
\
If the screen stays blank after you have changed the resolution, remove all discs, and then press and
hold the
^
(Open/Close) button on the top of the product for more than 5 seconds. The initialization
message appears on the screen and the player turns off automatically. When you turn your product
on again, all the settings will be reset. Run the Initial Settings procedure again. Then, go to Settings >
Picture > Resolution in the Menu, and select the correct resolution for your TV.
\
When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and
format) only. Resetting does not affect your network settings, so you should be able to skip Network
Setup and Software Update.
\
When the factory default settings are restored, all stored user BD data is deleted.
\
An Ultra HD Blu-ray Disc or standard Blu-ray Disc must have the 24 frame feature for the product to
use the Movie Frame (24p) mode.
44 English
Appendix
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection HDMI Optical HDMI Optical HDMI or Optical HDMI or Optical
Audio Stream
on
Ultra HD
Blu-ray Disc/
Blu-ray Disc
PCM
Up to PCM
7.1ch
PCM 2ch PCM PCM 2ch DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Up to PCM
7.1ch
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM
7.1ch
PCM 2ch
Dolby Digital
Plus
Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby TrueHD
Up to PCM
7.1ch
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
DTS
Up to PCM
6.1ch
PCM 2ch DTS DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
Up to PCM
7.1ch
PCM 2ch
DTS-HD High
Resolution
Audio
DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD
Master Audio
Up to PCM
7.1ch
PCM 2ch
DTS-HD
Master Audio
DTS DTS re-encoded
Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital
Up to PCM
5.1ch
PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS
Up to PCM
6.1ch
PCM 2ch DTS DTS DTS DTS
Definition for
Ultra HD
Blu-ray Disc/
Blu-ray Disc
Any
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Outputs only the main feature
audio stream so that your
AV receiver can decode the
audio bitstream.
You will not hear BONUSVIEW
audio or Navigation Sound
Effects.
Decodes the main
feature audio and
BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby Digital
bitstream or PCM.
* If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Settings are not applied. Output will be
PCM 2ch.
* If Audio Output is set to Auto, the player automatically switches to the proper format from the four listed
above.
Ultra HD Blu-ray Discs and standard Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose some menu navigation functions, Navigation Sound
Effects may sound. Navigation Sound Effects are different on each Ultra HD Blu-ray Disc/Blu-ray Disc.
45 English
07 Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need
replacing.
• Operate the remote control at a distance of no more than 20 feet
from the product.
• Remove the batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall the batteries and try to operate the
remote control again.
The disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Ultra HD Blu-ray Disc/Blu-ray
Disc/DVD.
The disc Menu does not
appear.
• Confirm that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Ultra HD Blu-ray Disc/Blu-ray Disc/DVD's software doesn't
support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is
out of range.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
• The Screen Ratio on your Ultra HD Blu-ray Disc/Blu-ray Disc/DVD
Disc is fixed and cannot be changed.
• This is not a problem with the product.
No audio. • Make sure you have selected the correct Digital Output in the
Audio Options Menu.
The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the
^
(Open/Close) button (on the top panel) for more than
5 seconds with no disc inside. The initialization message appears
on the screen, and the player turns off automatically. When you
turn your product on again, all the settings will be reset.
• When the factory default settings are restored, all stored user BD
data will be deleted.
46 English
Appendix
PROBLEM SOLUTION
Forgot password. • Press the
^
(Open/Close) button (on the top panel) for more than
5 seconds with no disc inside. The initialization message appears
on the screen, and the player turns off automatically. When you
turn your product on again, all the settings will be reset.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD
data will be deleted.
The picture is noisy or
distorted.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output. • Check the connection between the TV and the HDMI jack of the
product.
• Check if your TV supports the 480p, 720p, 1080p, or 2160p
HDMI input resolution.
• To view video in the HDMI 720p, 1080p, or 2160p output mode,
you must use a high speed (category 2) HDMI cable.
Abnormal HDMI output
appears on the screen.
• If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
• Go to the table of contents and find the section of the user manual
that contains information about the feature you are having the
problem with, and then follow the procedure again.
• If you still cannot resolve the problem, please contact your nearest
Samsung authorized service center.
Play Multimedia on network
devices
You can see folders shared on
network devices, but cannot
see the files.
• The multimedia list only shows Video, Photo, and Music files.
Other types of files are not displayed.
Video plays intermittently. • Check if the network is stable.
• Check if the network cable is properly connected and if the
network is not overloaded.
The Network connection
between the product and the
PC is unstable.
• IP addresses within the same subnetwork should be unique.
If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
47 English
07 Appendix
PROBLEM SOLUTION
BD-LIVE
This product cannot connect
to the BD-LIVE server.
• Test whether the network connection is working using the
Network Status function. (See page 19)
• Check whether a USB memory device is connected to the
product.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
(See page 19)
• See if the BD-Live Internet Connection option is set to
Allow(All).
• If all above fails, contact the content provider or update the
product to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
(See page 19)
| NOTE |
\
When the factory default settings are restored, all stored user BD data will be deleted.
48 English
Appendix
Disc and Format Compatibility
Disc types and contents your product can play
Media Disc Type Details
VIDEO
Ultra HD
Blu-ray Disc
Ultra HD BD-ROM format.
Blu-ray Disc BD-ROM format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been
recorded and finalized, or a USB storage media containing MKV, MP4
contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
CDDA,
BD-RE/-R
Audio CD (CD-DA), music recorded on CD-RW/-R, DVD-RW/-R,
BD-RE/-R or a USB storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
| NOTES |
\
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording
conditions.
\
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\
Your product will not play content that has been recorded on a DVD-R at a bit-rate that exceeds
10 Mbps.
\
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that
exceeds 25 Mbps.
\
Playback may not work for some types of discs, or when you use specific functions, such as angle
change and aspect ratio adjustment. Information about the discs is written in detail on the disc box.
Please refer to this if necessary.
\
When you play a BD-J title, loading may take longer than a normal title. Also, some functions may
perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW (VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
• 3.9 GB DVD-R for
Authoring.
49 English
07 Appendix
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The region number for this product is displayed on
the rear panel of the product.
Disc Type
Region
Code
Area
Blu-ray
Disc
A
North America, Central
America, South America,
Korea, Japan, Taiwan,
Hong Kong and South
East Asia.
B
Europe, Greenland,
French territories, Middle
East, Africa, Australia and
New Zealand.
C
India, China, Russia,
Central and South Asia.
DVD-
VIDEO
1
The U.S., U.S. territories
and Canada
2
Europe, Japan, the
Middle East, Egypt, Africa,
Greenland
3
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific
Islands, Caribbean
5
Russia, Eastern Europe,
India, North Korea,
Mongolia
6
China
Logos of Discs the product can play
Blu-ray Disc BD-LIVE
Ultra HD Blu-ray Disc
NTSC broadcast system in U.S.A, Canada,
Korea, Japan
HEVC
50 English
Appendix
Supported Formats
Supported Video File Formats
File
Extension
Container Video Codec Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
H.264 BP/MP/HP
4096x2160
4096X2160:
30
3840X2160:
60
60
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS
(Core , LBR)
G.711
(A-Law, μ-Law)
HEVC
(H.265 - Main,
Main10)
60 80
Motion JPEG 3840x2160 30 80
MVC
1920x1080
60
20
DivX 3.11 / 4 / 5 /
6
MPEG4 SP/ASP
Window Media
Video v9(VC1)
MPEG2
MPEG1
Microsoft MPEG-4
v1, v2, v3
30
Window Media
Video v7(WMV1),
v8(WMV2)
H 263 Sorrenson
VP6
*.webm
WebM
VP8 1920x1080
60 20
Vorbis
VP9 4096x2160
4096X2160:
60
40
*.rmvb
RMVB
RV8/9/10
(RV30/40)
1920x1080
60 20 RealAudio 6
51 English
07 Appendix
`
Limitations
- Even when a file is encoded by a supported
codec listed in the Video File Support table, the
file might not play if its content has a problem.
- Normal playback is not guaranteed if the file’s
container information is wrong or the file itself is
corrupted.
- Playing back contents having higher rates
than the base bit rate/frame rate may cause
stuttering sound or video.
- The Seek (Jump) function is not available if the
file’s index table is damaged.
- When you playback a file remotely through a
network connection, video playback may stutter
depending on the network conditions.
- Some USB/Digital camera devices may not be
compatible with the product.
- HEVC codec is supported only for MKV, MP4.
and TS containers.
- The DivX codec is not supported by models
made for the U.S. or Canada.
`
Video decoder
- Supports up to H.264 Level 4.1. (Does not
support FMO/ASO/RS)
- Does not support VC1/AP/L4.
- CODECs except for WMV v7, v8, MSMPEG4
v3, MVC, VP6
1) Below 1280 x 720 : 60 frames max.
2) Above 1280 x 720 : 30 frames max.
- Does not support GMC 2 or higher.
- Supports SVAF Top/Bottom, Side by Side, Left/
Right view sequence type(2 ES)
- Supports BD MVC Spec.
`
Audio decoder
- Supports WMA 10 PRO (Up to 5.1ch).
- Does not support WMA lossless audio.
- Also supports the M2 profile.
- The RealAudio 10 lossless format is not
supported by models made for China and Hong
Kong.
- Does not support QCELP/AMR NB/WB.
- Supports vorbis (Up to 2ch).
- Supports DD+ (Up to 7.1ch)
- The DTS LBR codec is supported only for
MKV / MP4 / TS containers.
| NOTE |
\
Some MKV and MP4 format discs may not
play, depending on their video resolution and
frame rate.
Supported Subtitle File Formats
Name
File
Extension
External
MPEG-4 Timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced
SubStation Alpha
.ass
Powerdivx
.psb
SMPTE-TT Text
.xml
Internal
Xsub
AVI
SubStation Alpha
MKV
Advanced
SubStation Alpha
MKV
SubRip
MKV
VobSub
MKV
MPEG-4 Timed text
MP4
TTML in smooth
streaming
MP4
SMPTE-TT TEXT
MP4
SMPTE-TT PNG
MP4
52 English
Appendix
Supported Music File Formats
File
Extension
Type Codec
Support Range
*.mp3
MPEG
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4
AAC -
*.flac
FLAC
FLAC
24bit/192kHz
Supports up to
two channels.
*.ogg
OGG
Vorbis
Supports up to
two channels.
*.wma
WMA
WMA
For WMA 10 Pro
supports up to
M2 profile and 5.1
channels. WMA
lossless audio is
not supported.
*.wav
wav
wav -
*.mid
*.midi
midi
midi
Type 0, type 1
and Seek is not
supported.
Only available with
USB.
*.ape
ape
ape -
*.aif
*.aiff
AIFF
AIFF -
*.m4a
ALAC
ALAC -
Supported Picture File Formats
File
Extension
Type Resolution
*.jpg
*.jpeg
JPEG
15360x8640
*.png
PNG
4096x4096
*.bmp
BMP
4096x4096
Notes on the USB connection
• This player supports USB storage media, MP3
players, digital cameras, and USB card readers.
• Some USB/digital camera devices may not be
compatible with the player.
• This player supports the FAT16, FAT32, and
NTFS file systems.
• Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The player does not support the PTP (Peer to
Peer) protocol.
• Do not disconnect a USB device while it is
transferring or recording data.
• The bigger the image resolution, the longer the
image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
• This player only supports video that is under
30fps (frame rate).
• This player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
• If some USB devices require excessive power,
they may be limited by the circuit safety device.
53 English
07 Appendix
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD
manufacturer.
• SAMSUNG is not responsible for any data file
damage or data loss.
• This
player does not support NTFS compressed,
sparse, or encrypted files.
- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
AVCHD (Advanced Video Codec High
Definition)
• This player can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Color" format.
This player can play back AVCHD discs that use
"x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
| NOTES |
\
Some AVCHD format discs may not play,
depending on the recording conditions.
AVCHD format discs need to be finalized.
\
"x.v.Color" offers a wider color range than
normal DVD camcorder discs.
54 English
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial Ultra HD BD-ROM, BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R,
DVD-RW/-R; and CD-RW/-R.
• Discs other than the above cannot and/or are not intended to be played by this player. And some of
the above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the Ultra HD BD-ROM,
BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player
may not respond to all operating commands or operate all features of every disc. These and other disc
compatibility and player operation issues with new and existing format discs are possible because:
- Ultra HD Blu-ray/Blu-ray is a new and evolving format and this player may not operate all features
of Ultra HD Blu-ray Discs/Blu-ray Discs because some features may be optional, additional features
may have been added to the Ultra HD Blu-ray Disc/Blu-ray Disc format after the production of this
player, and certain available features may be subject to delayed availability;
- not all new and existing disc format versions are supported by this player;
- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
- some discs are produced in a manner that allows specific or limited operation of certain features
during playback;
- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
- some discs bearing the Ultra HD BD-ROM, BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R,
DVD+RW/+R and CD-RW/-R logos may still be non-standardized discs;
- some discs may not be played depending on their physical state or recording conditions;
- problems and errors can occur during the creation of Ultra HD Blu-ray Disc, Blu-ray Disc, or DVD
disc software and/or during the manufacture of discs;
- this player operates differently than a standard DVD player and other AV equipment for reasons
noted throughout this user manual and for other reason(s) discovered and posted by the SAMSUNG
customer care center.
• If you encounter disc compatibility or player operation problems, please contact the SAMSUNG
customer care center.
You can also contact the SAMSUNG customer care center for possible updates for this player.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
• For product progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET'S COMPATIBILITY
WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
55 English
07 Appendix
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Ultra HD Blu-ray Disc and Blu-ray Disc format, similar to use of CSS (Content Scramble System)
for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS
protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for
Ultra HD Blu-ray Disc and Blu-ray Disc formats, which imposes certain restrictions including playback
restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on
AACS, BD-ROM Mark, BD+, or this product, please contact the SAMSUNG customer care center.
• Many Ultra HD Blu-ray Discs/Blu-ray Discs/DVDs are encoded with copy protection. Because of this,
you should only connect this player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Ultra HD Blu-ray Discs/Blu-ray Discs/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,
display, distribution, or revision of television programs, videotapes, Ultra HD Blu-ray Discs, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a
postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2015 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
56 English
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
Licenses
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the
double-D symbol are trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol,
the DTS-HD logo, and DTS-HD Master Audio are registered trademarks or
trademarks of DTS, Inc. in the United States and/or other countries.
© DTS, Inc. All Rights Reserved.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source License Notice
- In the case of using open source software, Open Source Licenses are available on the product
menu.
• Blu-ray Disc™, Blu-ray™, Ultra HD Blu-ray Disc™, Ultra HD Blu-ray™ and the logos are trademarks of
the Ultra HD Blu-ray Disc/Blu-ray Disc Association.
57 English
07 Appendix
• THIS PRODUCT IS SOLD WITH A LIMITED
LICENCE AND IS AUTHORISED TO BE USED
ONLY IN CONNECTION WITH HEVC CONTENT
THAT MEETS EACH OF THE THREE FOLLOWING
QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS
NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE
PRODUCT.
THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED
BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY,
UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH
CONTENT BY A LICENSED SELLER OF THE CONTENT.
YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED
ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.
Specifications
General
Weight 4.0 Ibs (1.8 kg)
Dimensions
16.0 (W) X 1.8 (H) X 9.1 (D) inches
(406.0 (W) X 44.7 (H) X 230.0 (D) mm)
Operating Temperature Range +41°F to +95°F (+5°C to +35°C)
Operating Humidity Range 10 % to 75 %
USB
Type A USB 2.0
DC output 5V 500mA Max.
HDMI
Video 2160p, 1080p, 720p, 480p
Audio PCM, Bitstream
Audio Output Digital Audio Output Optical
Network Ethernet 100BASE - TX Terminal
• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• For information about the power supply and power consumption, refer to the label attached to the
product.
• Weight and dimensions are approximate.
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and
workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty period
and the failure is due to improper workmanship or defective materials, SECA will repair or replace the
product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address
of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It
must be presented to the authorized service center at the time service is requested.
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line
voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping.
Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are
explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically
be voided for any unit found with a missing or altered serial number. This warranty is valid only on products
purchased and used in Canada.
Samsung Electronics Canada Inc
2050 Derry Rd West
Mississauga, On. L5N 0B9
Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199
Website: www.samsung.com/ca
EXCLUSIONS (WHAT IS NOT COVERED)
LABOR
One year (Carry- in)
PARTS
One year
HEADQUARTERS
Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada
TEL: 1-800-SAMSUNG (1-800-726-7864)
www.samsung.com/ca/support
© 2017 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
Center.
Country Contact Center
Web Site
`
North America
CANADA 1-800-SAMSUNG (726-7864)
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support
