Loading ...
Loading ...
Loading ...
Installation
1.
Attach the side collars to the wheel.
2.
On the right side, place the wheel
between the fork legs and insert the
lightly greased front axle shaft to the end,
through the right fork leg and wheel hub.
3.
Align the end of the front axle shaft with
the surface of the fork leg.
4.
Tighten the right axle pinch bolts to hold
the axle.
5.
Tighten the axle bolt.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m).
6.
Loosen the right axle pinch bolts.
7.
Tighten the left axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
8.
CB650RA only
Secure the wheel speed sensor wire with
the clamp.
20181218095506_31MKND000_enu_BOOK Page 118 Tuesday, December 18 2018 10:02:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
115
Continued
Surface of fork
leg
End of front
axle shaft
Wheel speed sensor wire
Clamp
CB650RA only
Loading ...
Loading ...
Loading ...