Loading ...
Loading ...
Loading ...
Getting Started
MHC-M20.US.4-736-073-12(1)
15
US
AC power cord (mains lead)
Connect the AC power cord
(mains lead) (supplied) to the
unit, then plug it into a wall
outlet.
To the wall outlet
AC power cord
(mains lead)
(supplied)
When the AC power cord
(mains lead) is connected, the
demonstration (page 17)
starts automatically. If you press
(power) to turn on the system,
the demonstration ends.
Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 17).
Inserting batteries
Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
Note
••
Do not mix an old battery with a new
one or mix different types of batteries.
••
If you do not use the remote control
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the system using the
remote control
Point the remote control at the unit’s
remote control sensor.
Positioning the
speakers
To obtain optimum performance
from the system, we recommend
you to place the speakers as shown
below.
Unit
Speaker (left)
Speaker (right)
0.3 m
(1 ft)
0.3 m
(1 ft)
Loading ...
Loading ...
Loading ...