Loading ...
Loading ...
Loading ...
10
Control Knobs
Each control knob is marked with the burner it controls.
You can use the control knobs to set the output required
in each case to various positions between the maximum
and the minimum settings. Never try to switch directly
from position “off” to position 1or from position 1to
position “off”.
For dual-flame burners, the inner and outer flames can
be controlled separately. The available power levels are
as follows:
1*08&
2
1
!
Burner grates
"
Control knobs
#
Small burner with an output of up to
3,400 BTU/h (1 kW) OptiSim
®
feature
see “OptiSim® Burner Cap Placement and
OptiSim® Burner Cap Installation” in
section~ "Accessories" on page 11
$
Medium burner with an output of up to
6,000 BTU/h (1.76 kW)
%
Large burner with an output of up to
9,010 BTU/h (2.64 kW)
&
Dual-flame burner with an output of up to
17,000 BTU/h (4.98 kW)
'
Serial Number/Rating label location
(right front underneath)
Indicators
’
Burner controlled by control knob
off Burner switched off
hi 9
Highest power setting and electric ignition
1 lo Lowest power setting
1 sim Small burner
Use this setting with the OptiSim
®
cap.
1 sim Dual-flame burner
Lowest power setting
Inner and outer flame on
full power.
Outer flame on low power,
inner flame on full power.
Inner flame on full power.
Inner flame on low power.
Loading ...
Loading ...
Loading ...