Loading ...
Loading ...
Loading ...
11.0 adjustments
11.1 venturi adjustment
11.2 flame characteristics
VENTURI ADJUSTMENT CHART
NG 1/8" (3.1mm)
P 3/16" (4.7mm)
!
WARNING
• Carbon can be distributed in surrounding living area if the air shutter is improperly adjusted.
33.2
It’s important to periodically perform a visual check of
the pilot and burner flames. Compare them to the
illustration provided. If any flames appear abnormal,
call a service person.
ADD IMAGE
HERE
36.1
3/8” - 1/2”
FLAME MUST
ENVELOP UPPER
3/8" TO 1/2"
(12.7mm - 9.5mm) OF
THERMOCOUPLE &
THERMOPILE
(9.5mm - 12.7mm)
This appliance has an air shutter that has been factory set open according to
the chart below:
Regardless of venturi orientation, closing the air shutter will cause a more
yellow flame, but can lead to carbonization. Opening the air shutter will cause
a more blue flame, but can cause flame lifting from the burner ports. The flame
may not appear yellow immediately; allow 15 to 30 minutes for the final flame
colour to be established.
AIR SHUTTER ADJUSTMENT MUST ONLY BE DONE BY A QUALIFIED
INSTALLER!
AIR
SHUTTER
OPENING
VENTURI
BURNER
ORIFICE
33.1
It is important that the orifice is securely inserted into the venturi.
note:
Birch Log Set BLKO36
Oak Log Set OLKO36
W415-1796 / A / 05.17.18
EN
26
Loading ...
Loading ...
Loading ...