Loading ...
Loading ...
Loading ...
Installation
62
4. Use a 7-mm spanner to remove the
nozzle and replace it with the new one
for the required gas supply, following the
indications given in the relevant tables
(see Gas types and Countries”).
Primary air adjustment
After removing the top, proceed as follows:
1. Loosen the screw A. Adjust the air flow
by moving the air regulator B to obtain
the distance C given in the relevant table
(see “Gas types and Countries”).
2. After adjusting each burner, reassemble
the appliance correctly.
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...