Loading ...
Loading ...
Loading ...
36
GENERAL INFORMATION
Setting the user programs
1
Press and hold the light ( ) key for more than 5
seconds until all the alarm indicators ( , , , ,
and ) blink and “––” appears in the copy quantity
display.
2
Enter a program number using the numeric keys.
●
The selected program number will blink in the copy quantity display.
●
If a mistake is made in steps 2 to 4, press the CLEAR ( ) key. The
copier will return to step 2.
●
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
Program name Program No.
Auto clear time 1
Preheat mode 2
Auto power shut-off timer 3
Stream feeding mode 4
Auto power shut-off setting 5
Border line for 2 in 1 or 4 in 1 6
Rotation copy 7
Auto paper select mode 8
Auto tray switching 9
Auditing mode 10
Account number entry 11
Account number change 12
Account number deletion 13
Number of copies per account 14
Resetting account 15
Erase width adjustment 16
Layout in 2 in 1 copy 17
Layout in 4 in 1 copy 18
Offset of paper output tray 19
3
Press the START ( ) key.
●
For programs 1 to 9 and 16 to 19, the entered program number will be
steadily lit on the left side of the copy quantity display and the
currently selected parameter number for the program will blink on the
right side.
●
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 38 for setting programs 10
to 15.
USER PROGRAMS
User programs
For operation of these programs after
step 3, see page 38.
Loading ...
Loading ...
Loading ...