Loading ...
Loading ...
Loading ...
8
QUICK REFERENCE GUIDE
POWER Button: Press to turn the dehumidifier on and off.
MODE Button: Press to change the unit between dehumidify, fan and laundry mode.
TIMER: Repeatedly press the timer button to adjust the duration of the timer (1-24 hrs, start/ stop
timer).
If set while the unit is running: The number will represent the number of hours the unit will operate before
turning off. This will not be affected if the unit enters defrost mode or the tank is emptied and reinserted.
If set while the unit is in standby: The set number represents the period in hours after which the unit will
start. To cancel start / stop mode press the timer key again.
Up and Down Buttons: While the unit is in dehumidify mode these buttons can be used to
adjust the desired humidity level. The desired relative humidity can be set between 30 and
90% in 5% increments. Pressing DOWN below 30% will put the unit in continuous mode (CO).
Pressing UP above 90% will put the unit in auto mode. In auto mode the desired humidity
will be based on the room temperature.
AUTO MODE (AU)
ROOM TEMPERATURE
DESIRED HUMIDITY (%)
≤ 20°C
60
21 ≤ Room Temp ≤ 27°C
55
˃ 27°C
50
LAUNDRY MODE: When drying clothes it is advised for the dehumidifier to operate continuously with
maximum water extraction until the water tank is full. Set the unit to the laundry mode, and the unit will work
until the water tank is full. Do not place clothes directly over any of the vents on the dehumidifier. Make sure
that there is nothing blocking the hot air exhaust air flow and for best results place the laundry within 1.5
meters of the dehumidifier.
NOTES:
If a permanent drainage pipe is fitted the unit will not stop operating. Setting the desired humidity to
around 35% is good for laundry mode, a quick drying boost, or in emergencies. It is not recommended
for long normal operation in a domestic or office environment.
To allow more moisture in the air, press the up button and set to a higher desired humidity (e.g. 60-
70%).
We recommend setting the humidity to 50-55%. This is great for domestic operation and dry
storage
Setting the humidity to 60% is great for personal comfort and applications where 50% RH is
considered too dry
Setting the humidity to 70% is ideal for unoccupied properties or where an economical run is needed
without the need to reduce the humidity further.
Loading ...
Loading ...
Loading ...