Loading ...
Loading ...
Loading ...
6
BEFORE FIRST USE
Place the package containing the Cuisinart
®
Cordless Rechargeable Multi-Grater on
a sturdy surface and unpack all pieces, being sure to remove all packaging materials
from in and around the unit.
To remove any dust that may have accumulated during packaging, wipe the
charging base and main body with a clean, damp cloth.
The 3 drums, drum cover, hopper assembly and pusher can all be removed from the
unit and washed with warm soapy water or placed on top rack of dishwasher.
Be sure to rinse and dry thoroughly.
Read all instructions completely for detailed operating procedures.
ASSEMBLING YOUR MULTI-GRATER
After your multi-grater has been thoroughly cleaned, be sure it is properly assembled
before using.
1. Be sure that all parts are completely dry
prior to assembly.
2. Insert the hopper into the left hopper
cover, lining up the 2 tabs. It will click
into place.
3. Attach the right hopper cover, ensuring it
clicks to lock into place.
4. Attach the hopper assembly to the main
body of the unit by inserting the tabs on
the bottom of hopper assembly into the
open slots on the main body.
5. Slide away from the handle to secure.
6. Insert the desired processing drum into the
hopper, being sure the end with gear is
facing out.
7. Slide the drum cover into position.
8. Attach the food pusher to the handle,
pressing it firmly into place.
9. Your multi-grater is now ready to charge.
CHARGING YOUR MULTI-GRATER
NOTE: The batteries included in this unit are not charged. Before initial use, the
batteries must be charged for 24 hours to insure maximum operating capability. For
best performance, fully discharge and recharge the battery 3 times before first use.
1. Ensure the multi-grater is properly assembled.
2. Attach the DC plug of the charger to the charging base.
3. Place assembled multi-grater onto charging base, ensuring the multi-grater
locks into place.
4. Plug charger into a 120V - 60Hz AC outlet only.
5. The red light will illuminate to indicate the main unit has been correctly placed
on charging base and that it's accepting a charge. If the red light is not illumi-
nated, lift and reposition unit on the charging base.
6. If after repositioning, the red light is still not illuminated, check to ensure that
the power cord is securely plugged into outlet and the DC plug is securely
plugged into the charging base.
If problem persists, please contact our Customer Service Center at
1-800-726-0190 to have your multi-grater replaced.
Loading ...
Loading ...
Loading ...