Loading ...
Loading ...
Loading ...
Before you call for service… ge.com
Consumer Support
Operating Instructions
Safety Instructions
Installation Instructions Troubleshooting Tips
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Top burners do not light Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
or do not burn evenly inserted in the electrical outlet. grounded outlet.
Burner hole or slits on the side • Remove the burner heads and caps and clean them
of the burner may be clogged. with a sewing needle or twist-tie. Make sure you do not
enlarge the holes. Check and clean the electrode
area for burned-on food or grease.
Improper burner assembly. • Make sure the burner parts are installed correctly.
See the Care and cleaning of the range section.
Burner flames very Improper air to gas ratio. • If range is connected to LP gas, contact the person
large or yellow who installed your range or made the conversion.
Clock does Plug on range is not completely • Make sure electrical plug is plugged into a live,
not work inserted in the electrical outlet. properly grounded outlet.
A fuse in your home may be • Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the oven section.
Surface burners light The oven gas shut-off valve • Model JGBS80: To check the oven gas shut-off valve,
but oven does not may have accidentally been remove the broiler drawer or kick panel (see the
moved during cleaning or Care and cleaning of the range section) and look for
moving. the gas shut-off lever at the back of the range.
• Model JGBS09: To check the oven gas shut-off valve,
slide the range out and look for the gas shut-off lever
through an opening in the back of the range.
39
Lever is
shown closed.
PULL TO OPEN.
Lever is shown closed.
PULL TO OPEN.
Back of range
Loading ...
Loading ...
Loading ...