Greenworks 2535102T X-Range 60V 21" Brushless Lawn Mower (Tool Only)

User Manual - Page 10

For 2535102T.

PDF File Manual, 14 pages, Read Online | Download pdf file

2535102T photo
Loading ...
Loading ...
Loading ...
8.1 START THE MACHINE
1
2
1. Push and hold the start button (2).
2. While you hold the start button, pull the bail switch (1) in
the direction of the handle bar.
3. Once the machine has started you can release the start
button.
8.2 STOP THE MACHINE
1. Release the bail switch to stop the machine.
WARNING
Wait until the blades fully stop before you start the machine
again. Do not quickly turn the machine off and on.
WARNING
Always remove the battery pack after you complete the
work.
8.3 EMPTY THE GRASS CATCHER
1. Stop the machine.
2. Remove the battery pack.
3. Open the rear discharge door and hold it.
4. Hold the grass catcher by its handle and unhook it from
the door rod.
5. Close the rear discharge door.
6. Empty the grass catcher.
8.4 OPERATION TIPS
Do not try to override the operation of the start button or
bail switch.
Do not tilt the machine when you start it.
Do not put hands or feet near or below the turning parts.
Keep the discharge chute clean.
Do not cut wet grass.
Higher blade height is necessary for new or thick grass.
Clean the bottom of the mower deck after each use.
Remove grass clippings, leaves, dirt, and other debris.
9 MAINTENANCE
WARNING
Remove the safety key and battery pack from the machine
before maintenance.
WARNING
Keep the motor and battery pack free from grass, leaves or
too much grease.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
9.1 REPLACE THE BLADE
21
22
23
NOTE
This mower comes with a high lift blade. Normal stock
mower blades perform well on dry, shorter grasses, and are
optimized for efficiency, while a high lift blade works better
in extreme conditions. The high-lift blade has deeper curves
on the ends, which increase suction to circulate and expel
the clippings. The higher air flow also helps prevent
clogging when mowing tall or wet grass.
11
English
EN
Loading ...
Loading ...
Loading ...